Skip to main content

I'd like to apologize in advance if the formatting is weird, this is my first real post here.

When I was young, one of my favorite displays I saw at any train show were the ones operated by the Lego clubs, the fact that a layout the size of an O gauge layout could be made piece by piece just amazed me. I'm not going to take any credit for being the first to do this, a guy on a Lego forum that did a similar project blows my little train out of the water, but I feel this is still cool enough to share.

Say hello to the Lego Liner, a combination of a two preexisting sets and a few MOCs (my own creations), as well as plenty of spare Lionel, MTH, Williams, and K line trucks:

thumbnail_IMG_1431

Motive Power:

thumbnail_IMG_1432 thumbnail_IMG_1433kt404-1

Our humble 0-4-0 leading the train is based off the KT404-1 Small Locomotive with Tender, and more specifically, the green version that I got for Christmas as a kid back in 2004. This isn't the original kit however, every piece in this train aside from the trucks was ordered from a website that deals in second hand legos called Bricklink. I made a few changes to the overall design to fill in empty space such as the cowcatcher and front pistons, as well as replacing its regular smokestack with a western style one and its European style headlights with a single one mounted on the front of the smokestack. Powering the train, at least for now, is a simple MTH bump and go trolley chassis, which is surprisingly strong enough to move the 5 car consist. The chassis is attached through a set of plates and studs that were superglued (yes I know this is cheating) to the tops of screws, and then set into the screw holes on the chassis and glued into place, while this does require a bit of care when moving, it's sturdy enough for now.

The tender rides on a spare Williams 6 wheel tender truck that has had a pair of 2x2 plates glued on to the sides which clip onto the underside of the tender. For the engine/tender drawbar, actual Lego train magnets are used, and even though they have only failed on me twice, they feature studs to easily make the coupling more sturdy should the need arise.

The Carriages:

thumbnail_IMG_1435thumbnail_IMG_1434

The Lego Liner's consist is made up of 4 (5 including the tender) cars, a baggage car, two coaches, and a caboose. each carriage uses the same scheme to attach the trucks to the base, that being a 4x4 round plate with a hole in the middle originally intended for technic pins, now holding the screw for an O gauge truck. To clear the head of the screw, 1x2 plates are used, and these attach to the undercarriage of the various Lego cars. The three passenger cars are MOCs (my own creations) that I made in a Lego digital designer program and then ordered the parts online the same way I did with the locomotive, while the caboose was acquired pre owned and pre built off of everyone's favorite bay, it seems to be loosely based off of the actual Lego 10014 Caboose set.

Operation:

This video is a bit outdated due to the fact it was filmed before I finished the baggage car and built carriage #3, but it shows the train in action on the River City 3 Railer's 12x15 layout:

The Future:

While I do have a whole train, this is definitely not the end of this project. While the trolley chassis runs fine, it's limited to forward operation only in conventional mode, and it's also too weak to pull anything other than the Lego Liner. The end goal is to replace it with the chassis of a Lionel Junction 0-4-0 tank engine, which will grant it a hopefully stronger frame as well as the sounds and lionchief controls of the donor engine.

Attachments

Images (6)
  • thumbnail_IMG_1431: An overview of the set
  • thumbnail_IMG_1433: The tender, detached from it's chassis
  • thumbnail_IMG_1432: The engine, detached from it's chassis
  • thumbnail_IMG_1435: The 4 carriages
  • thumbnail_IMG_1434: an up close look at how the trucks are attached to the carriages
  • kt404-1: the original set that the engine is based on
Videos (1)
IMG_1270
Original Post

Replies sorted oldest to newest

@Patrick B, very nice set up!  I love the lego/O gauge combo. I have a caboose and gondola made with similar methods. 

I also made a hopper from BMR plans with brick built truck assemblies. 

For those who don't know,  lego L gauge is wider than O gauge,  so transitioning is a challenge.  Also lego train wheels are not the right profile for o gauge track.

Thanks Pat!  BMR jst sells the instructions with wheel sets, bearings and axles.  The do also sell lego to kadee coupler conversion boxes.  I found the kadee selection they used didn't grab the traditional lobster claws well so i upsized them and put them in the BMR mounts.  The rest of the parts were bricklink orders except for the wheels, which fortunately I found some suitable donors in a project box. 

details in this thread.

Update!

The Lego Liner has been upgraded to a V2 configuration? What changed? The addition of Lionchief!IMG_1709

Unfortunately no running videos as of yet, but I'll go over the details of this upgrade

To start, our new motor is that of a Lionel Junction starter set 0-4-0, I went with the "Little Steam" version mostly due to the fact that it was the only one I could acquire without buying a whole set off The Bay aside from Christmas ones, which I would've gone with if they were the only ones available, but the plan with this train is for it to be able to be used at shows year round, and a set with Christmas sounds wouldn't entirely work for that. The locomotive needed to be slightly reconstructed to allow the donor engine's board to fit in the cab, and I'm honestly surprised it fits as well as it does. The wire between engine and tender is just the "sound on/off" switch, which unfortunately fell off as I tried to reposition it to find a way to hide it better, thankfully it fell off in the "on" position, so I still have sound. The original Lego couplers I used for the drawbar had to go too, and are replaced with a spare drawbar that I had lying around screwed into where the coupler on the 0-4-0 originally was, with a few spare Lego pieces on the tender serving as the hitch. I had to glue those pieces on for stability but it is what it is. While the upgrade is a virtual success, it turns out the Lionel 0-4-0s have a rather small "pickup zone" for the inner rollers, and it stalls on switches on the outer mainlines of my Club's layout. If I can figure out how, I might pick up one of those old GP-7 trucks with the pickup roller and replace the tender truck with that and find a way to wire that into the 0-4-0's pickups.

Attachments

Images (1)
  • IMG_1709

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×