Skip to main content

Great news, as some of you know, I had been working for a while now trying to get a McKeen Motor Car that ran in San Diego back home.  Thursday the car was lifted from the ground and placed on a truck, from there the truck went to the shipyard in Anchorage and will leave Sunday.  From there it will arrive in Seattle around Thursday and hopefully reach San Diego Sunday the 20th.  I would like to thank everyone who has helped get this project going.  Once the car arrives home, we will start phase 2 of our restoration, the preservation stage.  If you would like to donate to the restoration, please click Here.  I will be sharing more photos on this post once they come in, I have a few photographers who will shoot the car when it comes down the coast, so those photos will be posted as well.  Keep an eye out for the car in the Train's News Wire as well.

Image4

Car being loaded onto the trailer.  The day before the snow had melted slightly and refroze over night, making a cracking noise when the car was pulled off of the frozen ground. 

Image3

Side view showing the the condition of the car, thankfully the side panels, which have been hit hardest by Alaska's notorious weather are in the worst condition, which would have been replaced even if intact.  The frame did not bow or torque at all when it was lifted, quite amazing for a car that is on her 108th birthday this year.   

Image6

McKeen Car almost ready to be moved from the yard in Anchorage, AK. 

Image 1

My Dream coming true.  Slowly but surely. 

Attachments

Images (4)
  • Car being loaded onto the Trailer.
  • Side view of the loaded car.
  • Transportation by Lynden Transport.
  • View showing the front of the car (rear on the trailer.)
Last edited by Madison Kirkman
Original Post

Replies sorted oldest to newest

I am in contact with the Nevada State Railroad Museum, and I know what they used for a drive system, however their system is very nice for slow speeds under 20MPH, I will probably need to be able to reach 50 or 60 for MTS and other services, so I plan on using a large enough motor to reach those speeds, and to do so with a Diesel Electric drive.  We will hide the modern equipment and try to quiet it as much as possible. We will also try to create and pump fake engine sounds from the cab to make it sound like a real engine is instead running the car.  As for the flywheel (?) that will also be powered and made to work like the original. 

 

You are taking on a real, tough project!  God Bless you for your efforts.  I believe that that a restoration of a car like this is really significant and worthwhile and should be well funded.  It's a shame that so much of that car-body is apparently missing.  But, like the old adage states:  "If it was built once, it can be built again."  What RR was the original owner?

Paul Fischer

I just wish that MTH would reconsider producing this rare, very early motor car prototype.  They had gone through the design stages, built a pre-production sample and then cancelled the whole project.  Hate to see that after all the time and investment that had been given to the project.  I saw the model at York and it really looked nice, but, foolishly I didn't order one at that time.  Maybe my one order would have pushed MTH over whatever their minimum was and they would have gone ahead with the model.

Paul Fischer

It looks like this topic has been idle for a while.

I have been very interested in McKeen Motor Cars, particularly the two 70 foot cars that ran on the Denver Laramie and Northwestern from Greeley to Denver.  My goal, at this point, is to build an O scale model (actually Proto48) to display at the Colorado Model Railroad Museum.  Because it is only for display, I don't plan to power it.

I have been gathering information from the Nevada State Railroad Museum.  I was able to see #22 while it was being restored and took lots  (not enough) of pictures.  I have a stack of drawings of various detail parts.  Unfortunately, many are copies of copies of copies and dimensional data isn't clear.

Right not, I'm working on CAD drawings to use to 3D print many (if not all) of the detail parts.  It can be laborious work but I'm enjoying it.  The devil is in the details and there are a lot of details.

Darrel

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×