Skip to main content

A friend just emailed me these pics.  I've never seen them before.  Two locomotives got away from a crew when they were using a third for switching. This is in California on the Southern Pacific in the 80's.  It is apparently the Brazos Bridge which spans the Napa River. An alert Signal Maintainer tried to lower the lift span to allow the GP9's to cross but realized the bridge would not lower in time so he stopped it halfway to save the bridge and prevent the 2 locomotives from striking the counterweight. A Railfan caught the whole thing on film and had the pictures published in Trains Magazine. There were pictures of the aftermath too including a large barge mounted crane fishing the locomotive out of the water.  Someone had their Nikon ready at the right time!  Matt

Train Bridge #1

Train Bridge #2

Train Bridge #3

Train Bridge #4

Train Bridge #5

Attachments

Images (5)
  • Train Bridge #1
  • Train Bridge #2
  • Train Bridge #3
  • Train Bridge #4
  • Train Bridge #5
Original Post

Replies sorted oldest to newest

Thanks for posting; I hadn't seen this before (or don't remember?).

 

Have to wonder, what was the engine crew's excuse. "Didn't think we needed handbrakes on 'flat' track ..." ?

 

http://wikimapia.org/4392047/B...Vertical-Lift-Bridge

The Brazos bridge is a lift railway bridge with 98 feet of clearance above the Napa River.  The lift structure remains in the elevated position except when a train passes.  There is a fully furnished apartment atop the lift that provides accommodations for the bridge keeper.  Originally, built as a swing bridge, it was converted to a lift bridge.  On several occasions the bridge has not been in the proper position to receive trains, resulting in locomotives plunging into the river.  The regional railway utilizing the bridge has episodically been active and inactive.  The bridge was refurbished and reopened in 2009 in order to serve trains from the California Northern Railroad that accesses the railway system operated by the North Coast Railroad Authority and the Northwestern Pacific railroad near Schellville to the west.
 

In 1983 two Southern Pacific locomotives went into the Napa River here. www.nilesdepot.org/niles/wreck.html

Last edited by Ace

Well, there may be more to this story than meets the eye.  (Could have been some sort of bizarre mechanical failure?) However, from what I can see in the photo:

 

* A set of light engines. (NOT a difficult task to stop in time.)

 

* Good visibility approaching.

 

* Likely operating under the Restricted Speed rule.

 

Frankly, even though I'm an Engineer and would like to take up for him... this one looks to be all the Engineer's fault.

In that case they failed to "properly secure" the locomotive consist.  A properly secured consist does not roll away. 

 

That information makes it easier to properly place who was at fault, for the Engineer in charge of the consist was also responsible for seeing that the consist was properly secured before being left unattended.

 

With the dire results of failing to properly secure the power... got a feeling a termination of the Engineer was the end result.

I didn't feel the need to imply anything Wowak.  Originally was just curious about how the incident happened.   Was in a hurry when I viewed the pics and read some of the comments.  Overlooked some of the replies that were humorous one-liners... which must have included yours.  Nothing personal was intended at you, so no need to take it further or get your panties in a wad.

 

Andre

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×