Skip to main content

Well, I am going to follow NWL with MY "new" American Flyer set, but its from (about) 1924 so its 8 years after the beautiful set posted by NWL above. 

Here is the Type XI engine with "A.F.-16" under the cab with embossed lettering in the casting and highlighted in gold.  It is  without the raised panel hence dating it from 1923 at the earliest.  Despite being nearly 100 years old, the CW motor works perfectly and so does both the cab brake lever and the under the frame brake trip which works with a brake rail in the track (which came with the set).

American Flyer type 11 loco 1923-26

Here is the entire train.  IAW Greenberg's AF Prewar O'Gauge the "new" 6 inch cars were introduced in 1923 or 1924.  He states that there is at least one verified set, just like this one, from 1924 so the book maintains that is the true introduction date of these new cars.  The Pullman is marked "Chicago, Milwaukee, and St. Paul" over the windows and 1206 - Seattle-1206 under the windows.  The 3-window , 6 panel door, mail / baggage is marked American Flyer Lines and 1205 on the left side of the door and "United States Mail / Railway Post Office" in two lines on the lower right side of the door.  Both have (using Greenberg's nomenclature) Type lV trucks and Type V couplers (garter slot) .  The color scheme and lettering date them from about 1924

American Flyer type 11 loco and train

Here are the Pullman and Mail/Baggage car in close up. 

American Flyer type 11 loco consist 1205 and 1206

Here is the set in the "bottom" of the set box.  Alas I don't have the cover and I can't really prove this is the bottom of this set box.  However, this one is a robust well constructed box both glued and stapled.  the dividers are the right size for the pieces and are also robust and permanently fastened into the outer box, so this clearly was a train set box, I just can't prove that it was for this set. 

American Flyer type 11 loco set box

Although I am not as familiar with early AF CW track, these pieces appear to be genuine and of the same time period as the cars.  As delivered to me, the "set" only had straight track (which of course could not be its original configuration) so I don't know if the curved sleepers are canted or flat.  The condition of the track is excellent however and consistent with the condition of the trains.

Hope you enjoy the pictures, this set was a thrill for me to find and acquire.

Don

Attachments

Images (4)
  • American Flyer type 11 loco 1923-26
  • American Flyer type 11 loco and train
  • American Flyer type 11 loco consist 1205 and 1206
  • American Flyer type 11 loco set box

Don,

The curved Flyer track would have the same ties (being sloped from one side to the other) just like the straight sections.  Your track appears to be correct for that time period.  Also your estimate of dating to 1923-1924 is certainly in the ballpark.  It could be from 1925-26, but it is difficult to date some of these items when we are c. 100 years out from their production.  I noted the baggage car does not have the Milwaukee St. Paul herald, which makes me believe this could be a later set, but like I said, it is difficult to date some of these items.  

NWL

 

 

I bought a 211 flatcar with truck from EBay, it showed up this week. I am real happy with it, the doors open, and the hood comes off. Used, but looks new to me.

 

78C44060-2461-40E1-A699-DBB50938D7E2 

0D7DDEE0-90E2-42D8-A304-1D9787F4E951 

A562887C-E5AE-4039-A322-5E6F884AC676

Attachments

Images (3)
  • A562887C-E5AE-4039-A322-5E6F884AC676
  • 0D7DDEE0-90E2-42D8-A304-1D9787F4E951
  • 78C44060-2461-40E1-A699-DBB50938D7E2
Videos (1)
F4D189CC-7CEE-4F51-ACDD-FCC558FC2EF1
Last edited by Craignor

Today my Dutchy mate has offered up a package that I just couldn't say no to ...

A Clockwork rake that unfortunately doesnt seem to wind up ( hopefully just a broken spring , or detached from the axle cage ) and is also lacking drive rods and the front steam assemblies , but in a first for me ... its GAUGE I ... and its also a Heinrich Fischer ! which kinda blows my mind a little , because I never knew Fischer did Gauge I ? Always living and learning

I know I havent come across them before in my travels, but obviously they are out there but there is bugger all on the web that I could find to increase my knowledge about them ?

Fischer in general seems to be fairly undocumented ?

This set looks very much like a "Blown Up" version of their O Gauge locos that were in British liveries for export ... but it looks  HUUUGE lol ( its still in the netherlands )

Even comes with a few lengths of Fischer track

Gauge I is a rabbt hole I never thought I could go down ( due to the $$$'s) but I suppose I now have a foot in the door lol!

Any info from our knowledgeable Euro collecting guys muchly appreciated !

( @FRENCHTRAINS @Arne ...and come back @sncf231e we miss you! )

 

 

 

Last edited by Fatman

Chris:  beautiful train.  However I was also really impressed with the hotel or station with the dome roof that was in the foreground of the video...who made that?  Oh and the 0-6-0 Tank, is that Hornby? 

  Fatman, what a find!  I have no Gauge 1 trains at all, likely because I could never afford them and they were not too popular in the US although they were made by Ives.  I even have had to give up my Standard Gauge trains at least in running, no space big enough. The color scheme on the Pullmans does seem reminiscent to my French Hornby Pullmans (shown below) although mine are from a much later era and much smaller of course.   Beautiful set Fatman thanks for posting.  Th

French Hornby Train - following view

Craiginor - I have an original Lionel 211 flat car, its my only series 200 car.  It is so big I could almost ride on it!  It does nicely hold some cool trucks (like yours) though.  I have a picture of it with a Wyandotte Tow Truck that fits, thing is huge.

Great pictures and videos all.  Hope everyone has a great week.  Stay healthy

Don

 

Attachments

Images (1)
  • French Hornby Train - following view
@Fatman posted:

Today my Dutchy mate has offered up a package that I just couldn't say no to ...

A Clockwork rake that unfortunately doesnt seem to wind up ( hopefully just a broken spring , or detached from the axle cage ) and is also lacking drive rods and the front steam assemblies , but in a first for me ... its GAUGE I ... and its also a Heinrich Fischer ! which kinda blows my mind a little , because I never knew Fischer did Gauge I ? Always living and learning

I know I havent come across them before in my travels, but obviously they are out there but there is bugger all on the web that I could find to increase my knowledge about them ?

Fischer in general seems to be fairly undocumented ?



 

 

 

Fatman,

yes, Heinrich Fischer had made 1 gauge, but I think only this set. I have never seen a other.

I donΒ΄t collect 1 gauge, but I have the same in 0 gauge.

fisch-202fisch-203

fisch-02

Arne

Attachments

Images (3)
  • fisch-202
  • fisch-203
  • fisch-02

In a fortuitous "Co-inkydink! " closed the sale on another Sakai B&O battery loco for spares

Its rather nice outside , but has had batteries left in at some stage so there is some corrosion one end of interior

looks OK this end internally ...

Other end ... Not so much ... who knows it might still run , but I'ma doubting ?

Depends on how much "BlackWire" has formed with the electrolysis ...TBD!

"Happytime No.1 many good fun" running gear tho

@jhz563 I'll let you know when the boxed set gets here LOL !

They are marketed as "Standard Gauge " train sets , and seem to have a collaborative history behind the various versions with attributes to Sakai Dakin and even Alps thrown around as manufacturers .

The Sakai collectors guys are happy to call them Sakai tho ...they are def 0-ish in scale tho

All the sets came with various 2-rail track .. and I could be wrong but I "think" it is nominally smaller than O ... I think @Steve "Papa" Eastman

might be able to chime in ?

The full set is in my post a page or so back ..

 

 They take D size batteries tho .. so def of a good size !

Last edited by Fatman
@Fatman posted:

@jhz563 I'll let you know when the boxed set gets here LOL !

They are marketed as "Standard Gauge " train sets , and seem to have a collaborative history behind the various versions with attributes to Sakai Dakin and even Alps thrown around as manufacturers .

The Sakai collectors guys are happy to call them Sakai tho ...they are def 0-ish in scale tho

All the sets came with various 2-rail track .. and I could be wrong but I "think" it is nominally smaller than O ... I think @Steve "Papa" Eastman

might be able to chime in ?

The full set is in my post a page or so back ..

 

 They take D size batteries tho .. so def of a good size !

More like S Gauge 

Steve

This week i had the pleasure to buy a very nice loco from EDOBAUD in great original condition which is rare as the paint was directly put on metal without any primer. It dates from 1932-35 and is a very good runner despite his weight. Edobaud trains are more gauge one size, even if they run on o gauge three rails, particularity is they take curent from the center and forward and bacward from the inside and outside rails so all wheels are isolated  and tracks had wood sleepers.

IMG_0804IMG_0805

And here are some EDOBAUD trains and accessories in action at home,

IMG_0795IMG_0798

Have a nice weekend,  Daniel

Attachments

Images (4)
  • IMG_0804
  • IMG_0805
  • IMG_0795
  • IMG_0798

This week i had the pleasure to buy a very nice loco from EDOBAUD in great original condition which is rare as the paint was directly put on metal without any primer. It dates from 1932-35 and is a very good runner despite his weight. Edobaud trains are more gauge one size, even if they run on o gauge three rails, particularity is they take curent from the center and forward and bacward from the inside and outside rails so all wheels are isolated  and tracks had wood sleepers.

 

And here are some EDOBAUD trains and accessories in action at home,

IMG_0795IMG_0798

Have a nice weekend,  Daniel

Love that rug!

Well friends, like usual some really terrific trains.  Daniel, I admit I have never heard of EDOBAUD trains, but that is one beautiful engine and in fabulous shape.  Papa Eastman great Marx chrome fronts!  Pd a beautiful 1668.  I have had the same experience with tenders, some with some without whistles.  I believe at the time Lionel sold the engines both ways at slightly different prices and I am sure that they would have swapped out a tender (or swapped in one with a whistle) to hit a price point for one of their key customers.  I just got a pre-war 204 and according to what I could learn it came both ways, mine has a 2688 W or whistle tender but the same engine was offered in sets w/o a whistle.  See the TCA Lionel Trains book, 2nd eddition, 1989, under "Special and Unique Items".

Well a few weeks ago, Fatman offered a great engine that he described as having a bit of play wear.  My offering today is like that.  Its not that exotic, its a Hornby M3 LMS Tank Engine.  This one has had some play for sure but now that I cleaned it up it doesn't look too bad.  CW motor including manual reverse seems to work OK as well.  In the following pictures, I paired it up with some Hornby Type 1 LMS coaches and it looked pretty good.  This one came to me in its original box from a source in UK and the price was but GBP 10 or about $13 USD.  How could it pass it up!! 

Here is a front 1/4 view.  Note that the M3 was made from 1931-1941 BUT the addition of side rods and steam chests occurred with a re-design in 1936 which was the first time the M3 had cylinders / rods. This has the pre-war 8 red spoke cast drive wheels  I believe this to be the "matt" finish which further dates this engine from 1939 -1941  The trademark on the back of the bunker is most defiantly the pre-war style.  The M3 "sort of" emerged after the war in '47-48 as the 101.

Hornby M3

Here is a  side view, showing off her "LMS" livery, handrails, and chrome steam dome.

Hornby M3 side

Here is a picture with two of my Type 1 Hornby LMS coaches.

Hornby M3 with train

The full train ready to depart .

Hornby M3 and coaches

Have a great weekend everyone.

Don

Attachments

Images (4)
  • Hornby M3
  • Hornby M3 side
  • Hornby M3 with train
  • Hornby M3 and coaches

Lovely Hornby rake there @Don McErlean and an absolute bargain on the Loco !

And  terrific EDOBAUD .. Frenchy never disappoints

Don ...Here is one in my collection thats a little more minty ( Strange for me LOL! )

I had a couple of wins this week ... first coming from the UK  is a post-war Hornby LMS  wagon .. which has been fitted with a nice ( reproduction?) canvas cover ...its not a true covered wagon as they had a rail to hold up the tarp , this one has a card insert fitted to hold the tarp in shape .. still a lovely looker tho !

And coming from France via the Netherlands is an exercise in co-operative buying lol .. My Dutch friend graciously accepted to bid on my behalf for it , and have it shipped to him to combine with the next  parcel I have coming from him loaded with European goodness. A nice addition and a even nicer reduction in postal costs as NL post only has two brackets up to 2 kg and 2-5 kg .So as I have over 2kg coming , post of this is pretty much free to me as I will have to pay the 5kg rate anyway ! So I saved nearly 20Euro on post this way on this CR ... He is a goooood friend lol !

A Charles Rossignol CR-60 locomotive and tender which is I think from the early 50's ?

Hey guys, happy weekend! I hope you're all well. I ran some Marx last night and took a few vids - totally mundane compared to the beauties posted here!

Edit-as an aside, all the switches and planning is frustrating me. I think also confining myself to 4x8 hasn't helped either. I'm considering tearing down the 4x8 and doing around the wall like I planned on before. Any advice from fellow tinscale modelers? 

 

Attachments

Videos (2)
VID_20200920_085319
VID_20200919_204819
Last edited by SteamWolf

Fatman thanks for your comment AND the picture of what my loco looked like when it was β€œyoung” !!  The Rossignol is really cool, I had only seen advertising pictures before now to see one IRL is great. 

Steamwolf- you have the great debate. Width vs length. The advantage of the 4x8 format is the width unlikely in an around the wall setup. The around the wall gives you running length but normally is not near as wide (note some of our forum members have both and of course that is ideal.) My layout is 40” x17 ft and while it gives me some long straights I miss enough width for scenery or accessories.  Also unless you can go 360 deg  you still have to turn back unless you choose point to point. 

I think its really personal choice  I favor a β€œtoy train” type layout kind of circa 1950’s   And I like to watch the trains β€œgo round”  However we have in the forum others who use the around the wall idea with much more prototypical operation and beautiful β€œagainst the wall” scenery.  Currently I wish I had your 4 ft of width (room limitation) but others do a super job with more slender and longer elements. 

One last thing.  In I were going to go slender I would definitely do 360 deg as once you have to turn back you need width to make the loop which takes up a lot of floor space even at 0-31radii

Don

<SNIP>

Hey Don, thanks for the valued input. I think I'll try to make the best of both worlds. It just hasn't worked out no matter what I try with the 4x8, I'm just not all the way happy with what's coming out of SCARM. My original plan called for point to point with reversing loops. I think I'll just stick to simple and do that.

GN + Tin

Attachments

Images (1)
  • GN + Tin
Last edited by SteamWolf

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×