Skip to main content

Have friend that has an early TMCC locomotive (he says it doesn’t have a programming switch) that he thinks doesn't’ produce as much smoke as it should. He wants to bring it over and run it on my layout which I operate with Legacy 990 1.5 in hopes he can in crease the smoke out put with the smoke control functions on the Cab2. Does this make any sense?

Original Post

Replies sorted oldest to newest

Bobby Cox posted:

Have friend that has an early TMCC locomotive (he says it doesn’t have a programming switch) that he thinks doesn't’ produce as much smoke as it should.

I seem to remember that most "early TMCC" locomotives didn't produce much smoke anyway.

He wants to bring it over and run it on my layout which I operate with Legacy 990 1.5 in hopes he can in crease the smoke out put with the smoke control functions on the Cab2.

You may have "smoke control functions" on your Cab-2, which is for Legacy & Vision Line models, but it will not do anything for a TMCC model.

Does this make any sense?

Nope.

 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×