Hello,
this is my first post here so please excuse any mistakes. I have a 10 by 6 mth Realtrax o scale layout. I have three locomotives on it at all times. One running and two parked on side pull off track. Recently when I have been running a train the lower cuts off to the track but not the DCS explorer. Can someone maybe help me on this one. I am really stumped and really new to this hobby.
Replies sorted oldest to newest
Is the fuse in the DCS Explorer blown?
No the DCS has power but when I run one train and then start another one on one of the two side tracks then the power on the tracks shuts off. Then comes on again in a sec or two. When I’m looking at the DCS explorer the lights stay on so it doesn’t lose power only the tracks.
An update I added a mth z1000 power brick and also have the one the came with the starter set. Both are running and seems all good. Please feel free to add some information. Thank you
Are you simply overloading the Explorer? Does the "Track" LED change from purple to red when this happens?
My DCS explorer fried so it is no more!! I upgraded to a mth tiu and wiu now I have no more problems. I also have a loinel zw250 transformer.
Access to this requires an OGR Forum Supporting Membership
