I have a track pliers that I use for my trains which are 0 scale and they are great for tightening up the track around the pin. My friend has recently resurrected his much used childhood S gauge trains.
I searched but could not find a plier for S scale track. Does anyone know if they make one specifically for S or, or will the 0 scale pliers work just as well.
I know the same job can be done with needle nose but I am trying to find a plier for his S scale.
Thanks,
Ed
Replies sorted oldest to newest
I've never seen any specifically for "S" Ed, but I would suggest you contact Doug Peck(?) @Port Lines.com or (978)465-8798 for further info.
This ogr sponser has these tools, but not sure about "S" tinman 3 rail
Guys,
Thanks for the replies. I did see tinman 3 rail but didn't see one specifically for S scale.
I will try Doug Peck in the morning.
I don't have any S scale track to see if my 0-scale pliers works with it. I don't want to steer my friend wrong with bad information.
Thanks for the help,
Ed
Access to this requires an OGR Forum Supporting Membership
