Skip to main content

I need to change the traction tires on my NKP Legacy Mallet (6-11322). The instructions in the owners manual are generic and not reflective of the process needed for the Mallet. Anyone ever done one of these before?  Do’s?  Don’ts?  Thanks in advance for any guidance you may have.

Original Post

Replies sorted oldest to newest

I looked at my 2-6-6-2 Mallet, and the rear set is fairly easy, just remove the rod screws from the back drivers and slip the tire over them and reassemble.  The front set are under the cross head, so that one you'll have to do a bit different.  It looks like you can reach the two rear set of drivers rod bolts, so if you take those off, you can slide the tire up and to the front driver without taking that hidden rod bolt out.

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×