Skip to main content

Chris Lord posted:
gunrunnerjohn posted:

Pat, that occurred to me, but I have family obligations on Sunday, and I want to be at our club show for at least one of the days.  I did skip this show a couple of years ago to go to Trainstock, if I make a habit of it, they might toss me out of the club.

Then you could join the NJ HiRailers!

If only you could move it a little closer.

ToddModel posted:

At the suggestion of one Scrapiron, I am checking in to see if there is any table space available. Please reach out to me either by email or the shop telephone number. I would like to show and offer some of our shadowbox models!

Hi Doug 

We have 5 tables that we dedicate for sales at the shows but we also have 45 low cabinets around the room that you are welcome to set up anything you would like for sale

 

To all

Weather report for Saturday is 54 degrees with a chance of a shower in the early morning     No SNOW excuses.

 

 

Ben,

What are the curves on the EL subway line, going to bring my 2 rail DL&W F3 ABA and NS DL&W SD70. just need to put the 3 rail rollers on and flip the switch in the engine. If they are O72 I will bring the 11 GGD heavyweights, other wise I will bring a tub of weaver freight cars. The subway track is the atlas flat rail correct, and the regular track is gargraves tube.....?

DL&W Pete posted:

Ben,

What are the curves on the EL subway line, going to bring my 2 rail DL&W F3 ABA and NS DL&W SD70. just need to put the 3 rail rollers on and flip the switch in the engine. If they are O72 I will bring the 11 GGD heavyweights, other wise I will bring a tub of weaver freight cars. The subway track is the atlas flat rail correct, and the regular track is gargraves tube.....?

The subway is Atlas   Minimum Radius is O63 but your not going to be able to run anything but subways there  The clearances are Verrrry tight and measured for subways

bluelinec4 posted:
DL&W Pete posted:

Ben,

What are the curves on the EL subway line, going to bring my 2 rail DL&W F3 ABA and NS DL&W SD70. just need to put the 3 rail rollers on and flip the switch in the engine. If they are O72 I will bring the 11 GGD heavyweights, other wise I will bring a tub of weaver freight cars. The subway track is the atlas flat rail correct, and the regular track is gargraves tube.....?

The subway is Atlas   Minimum Radius is O63 but your not going to be able to run anything but subways there  The clearances are Verrrry tight and measured for subways

Well that's no good, even the one at the end by the food court. The one that's open with no tunnels.

Last edited by DL&W Pete
gunrunnerjohn posted:
Chris Lord posted:
gunrunnerjohn posted:

Pat, that occurred to me, but I have family obligations on Sunday, and I want to be at our club show for at least one of the days.  I did skip this show a couple of years ago to go to Trainstock, if I make a habit of it, they might toss me out of the club.

Then you could join the NJ HiRailers!

If only you could move it a little closer.

GRJ, we have Members and Associate Members who live further than you. Pat & Jean for example. Marty & Dotty, for example. Mario E, for example. Captain John, for example. Steve Maier, for example. Chris L, for example. NO EXCUSES!

Gerry

Farmer_Bill posted:
Putnam Division posted:

Gilly@N&W and I start our journey mid afternoon......

Looking forward to seeing everyone!

Peter

Hope you make it before closing. It’s a five hour drive for me. Oh wait, I forgot how Peter drives. 😀

Can’t make it again this year. Might have to retire to have more free time like Gilly. 

Farmer Bill.......we will stay in North Jersey tonight and be there bright and early in the morning......Tom (Gilly@N&W) and I are both early risers (we're both at work around 0530)......it will be not problem to get there.....

In fact.....leaving mid afternoon today will put us near the Double T Diner in White Marsh MD around dinnertime. 

Peter

gmorlitz posted:
gunrunnerjohn posted:
Chris Lord posted:
gunrunnerjohn posted:

Pat, that occurred to me, but I have family obligations on Sunday, and I want to be at our club show for at least one of the days.  I did skip this show a couple of years ago to go to Trainstock, if I make a habit of it, they might toss me out of the club.

Then you could join the NJ HiRailers!

If only you could move it a little closer.

GRJ, we have Members and Associate Members who live further than you. Pat & Jean for example. Marty & Dotty, for example. Mario E, for example. Captain John, for example. Steve Maier, for example. Chris L, for example. NO EXCUSES!

Gerry

If the NJ HiRailers haven't thrown me out for poor attendance I find it hard to believe any club would toss you for one meeting a year. Why don't you tell them it's an ambassador mission.   

Mario, I am so glad that you joined the club. And that I got to meet you and communicate with you even though you cannot come to the club often. We understand that. 

GRJ would probably have a great time with the club even if he only came 3 or 4 times a year. And then I'd have at least one more member rooting for the Iggles & Phillies. 

Gerry

Kathie and I are back home on Long Island. Thank you to all the NJ Hi-Railers for yet another great Trainstock! Great people, great trains, great food. It doesn't get any better than that. And as I always say, it's a terrific cure for the post-holiday blues and a nice halfway point between the York Meets. I'll post some photos when we get them off the camera.

Chris

What a great time, this was my third and will be there next year. 

Hats off to the cook! Food was great and all of the members that I chatted with were great. Like talking with the young member Rich. Nice seeing young people getting involve. Took a lot of picture and videos for layout ideas. Love the standard gauge layout (should be one for prewar tinplate O gauge). Hope the organ is there next year as the music was great.

Thank you again NJ Highrailers!

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×