Skip to main content

4 replies

Trouble Building Train (Lash Up) with new 3rd Rail Santa Fe WB E6

BD Bryant Dunivan 111417OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Running engines with both being assigned the same engine ID  Set as Cab1 with Railsounds 5

 

  1.  Assigned A unit as #12.  Assigned B unit as #13.

 

  1. Both will run fine as solo and also coupled.

 

  1. Sounds crew talk come from both engines.

 

Running both engines as a lash up with #12 (A) being assigned as lead

 

  1. I create a train (in this case #8).

 

  1. I start buy adding the A unit.  No problem

 

  1. I then at the B unit.  There is no icon for crew talk or sounds

 

  1.  If I press set, it says that it is programming trains, then ready to run

 

  1.  If I do that, the train will not power up.

 

Running both engines as a lash up with #13 (B) unit as lead

 

  1. I create a train (in this case #8).

 

  1. I start by adding the B unit.  No problem

 

  1. I then add the A unit.  There is no icon for crew talk or sounds

 

  1. If I press set, it says programming trains, ready to run

 

  1. In this case the newly created train runs with sounds coming out of the B unit

 

  1. There is no control of the headlight.  It stays in the off position

 

I have never had experience with 3rd Rail sunset.  I think the instructions were pretty straight forward.  Do you have some thoughts on where I am derailed?

Original Post

Replies sorted oldest to newest

B BobbyDOGR Forum Member DIGITAL SUBSCRIBER

Have never done one with a Cab2 so I'm curious. Have Atlas units, guessing same ERR units installed. These are an E6-A and an E6-B unit? To begin at your last question #1, does it ask which way the trailing unit is facing? I'd guess if it doesn't think it is rearward the headlight won't illuminate.  The other stuff is odd. Have you tried setting them as engine 1 and then pretending to make the lash up with the A and B units in the different position so you are just running one engine and see if they function?

BD Bryant Dunivan 111417OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I have the identical Atlas units you have.  No problem with those at all.  

When you enter the 2nd engine, you can pick direction prior to pressing the set button.  It has no effect.  "Dead Train".  Neither the "A" or the "B" power up.

Scott suggested setting the engines to TMCC instead of CAB1.  I will give it a try.  I thought I did that also, but no avail.

B BobbyDOGR Forum Member DIGITAL SUBSCRIBER
Bryant Dunivan 111417 posted:

I have the identical Atlas units you have.  No problem with those at all.  

When you enter the 2nd engine, you can pick direction prior to pressing the set button.  It has no effect.  "Dead Train".  Neither the "A" or the "B" power up.

Scott suggested setting the engines to TMCC instead of CAB1.  I will give it a try.  I thought I did that also, but no avail.

IIRC he may be onto something. Cab-1 is the primitive setting? Is there also a listing for "100 speed steps" or something? We have been running the Atlas A-B units all with the same engine number. Have an A-A pair that is yet to be entered.

BD Bryant Dunivan 111417OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER
BobbyD posted:
Bryant Dunivan 111417 posted:

I have the identical Atlas units you have.  No problem with those at all.  

When you enter the 2nd engine, you can pick direction prior to pressing the set button.  It has no effect.  "Dead Train".  Neither the "A" or the "B" power up.

Scott suggested setting the engines to TMCC instead of CAB1.  I will give it a try.  I thought I did that also, but no avail.

IIRC he may be onto something. Cab-1 is the primitive setting? Is there also a listing for "100 speed steps" or something? We have been running the Atlas A-B units all with the same engine number. Have an A-A pair that is yet to be entered.

I made up my Atlas Engines without a hitch.  The 3rd Rail supposedly running the same software is not working.  I will sset the engines to TMCC tonight and see if I get anywhere.  Stay tuned, unless someone has something else to put in.

Add Reply

Views: 376
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×