Hello everyone. Just invested in a TIU and Wifi module, so this is my first attempt at DCS past the rtr remote. I have two PS2 engines and I can load one or the other, but not both at the same time. It works fine with one engine loaded but when I switch engines on the track, I can run it with the other engines ID and it cannot find the new engine. I have tried it on an isolated track but no change. I hope this is just a senior moment but I am stumped on what to try next.
Replies sorted oldest to newest
Seems both engine have the same ID.... With the dcs remote you would take one off the track and edit the other one to a different id. Don't know about WiFI.
There's a bug in the WiFi App that will not add an engine if it has the same DCS ID# as one already in the app. MTH is aware of this and will correct it in the next app release.
In the mean time, use a DCS Remote to edit the DCS ID# of the engine already in the app, delete that engine from the app, and then add both engines back to the app again.
Thanks Gregg and Barry. Thanks also to MTH for posting here, that they are aware of problems and will do an update.
Access to this requires an OGR Forum Supporting Membership
