Trouble with pickup roller bracket | O Gauge Railroading On Line Forum

Bobby CoxOGR Forum Member

I have a die cast Lionel UP Genset Switcher, 6-28314. The little plated bracket on the bottom of the front truck that holds the pickup roller is loose allowing roller to create a short when going across a switch. The little bracket is fastened to the bottom of the truck with a little screw that comes through the truck from the top of the truck. I can’t get to the screw head to tighten it without taking the truck off of the chassis. Have been unable to figure out how to disconnect the truck so I can get to the screw head. I have taken the shell off but still can’t see a way to disconnect the truck. Please help!

Thanks, Bobby Cox

9/21/219:18 AM

Original Post

Replies sorted oldest to newest

Mellow Hudson MikeOGR Forum Member

Bobby,

Here's the top view of a truck:

There's a keyed section on top of it (outlined in red below because it's very hard to see above):

Remove the truck with the loose collector by turning it 90 degrees so that the keyed section on top of it (in red above) will drop down through the keyhole in the center of this mounting plate, which is attached to the frame:

Once it's out the rest should be easy, and then reverse this process to put the truck back.

Mike

Attachments

Hide

Images (3)

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Oddly, these are known as "twist off" trucks.

Add Reply

Sign In To Reply

<div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>
    <div class="first-modal-focus focus-utility-element" tabindex="0" aria-label="Inside Modal"></div>

<h4 id="{%=id%}_title" class="margin-bottom-10 popup-title"></h4>
    <div id="{%=id%}_body" class="margin-bottom-10 popup-body">
        </div>

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>