Skip to main content

Replies sorted oldest to newest

You can have as many loops as you want with Legacy, and there is absolutely no need to isolate the outside rail. Just connect a wire from the Legacy base to either outside rail of each independent loop. Or, even more simple, just run one wire from the base to the common on a terminal strip from which you run hot and common to provide track power to each independent loop.

Last edited by Keith L

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×