Skip to main content

I'm having a problem with my systems not recognizing any of my MTH engines. They are all shown in the hand held remote inactive list and will not move to active even though the engines are on the track and powered up. I have pressed the READ button but it still says No Active Engines. Any suggestions as to what the problem may be? I have two operating TUI units and neither one will respond.

Original Post

Replies sorted oldest to newest

Go back to basics as stated in several post.  New batteries in remote.  Tiu powered via Fixed 1 or aux power.  TIU led on and flashes the number of time for TIU address.  If it is not on, your TIU does not have power.  Can remote just talk to TIU.  See it, call up the TIU revision data.  If so, you know your communicating with TIU.   Once that is set you can figure out if it will talk to a train.

Power in correctly and out correctly to track.  Red to center rail, black to outside rail?  Definitely have power out of TIU?  Lock on light is helpful.  G

Add Reply

Post
This forum is sponsored by MTH Electric Trains
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×