Skip to main content

On my wifi I'm only getting 2 lights now, the power (Green) and the wifi (Blue). The white light showing connected to TUI is not lighting up. The TUI has the red light on and I have  fixed power to track through fixed port 1 and fixed port 2 ( 2 separate tracks) . I have everything the TUI, Wifi, 2 MTH 100 watt, 1 MTH 50 watt to axillary hookup of the TUI all on one power cord. App is 3.1.0, Wifi is updated to 1.1. Should the wifi be turned on first, then the TUI or doesn't it matter????

Thanks for any help, Kenny

Original Post

Replies sorted oldest to newest

Update: After an evening of not being able to get the wifi to pick up my TIU (white light) ( green & blue on), I turned power to whole system off. Let it set turned off, while I slept, 8 hours later, turn the power back on and system starts up wifi blinking several lights and get my (white, green, blue lights all on! Working fine. This is the 2nd time this has happened. 

I will try another USB cable to the TIU !

2nd Update: As said earlier, if I leave power off for the night, and then retry, everything comes on TIU is found, works great. Turn it off, and it will not come back on! Only get a green power light and a solid blue wifi light on, NO white TIU light on the wifi unit.

Barry, I tried a second USB cable. Matt, I tried to turn only the TIU unit with power on for minutes, then put power to wifi unit same results. Wifi green light and blue light, but no white light needed to run the system.

IF I get it to come on again, I plan on leaving the wifi and TUI aux powered on and just shut the 2 MTH Z-100's off that supply power to my 2 fixed tracks.

I'm wondering if something is wrong with my TIU, but when it on, it runs 4 trains just fine.

Ricky, I have fixed power into port 1 + 2 plus aux power going in as well. The TIU red light is on and both tracks have the trains lit up.

3rd Update : I came home after having all power off for hours. Turned it on and the wifi started blinking and I got my green, blue and white light to come on. Ran the 4 trains on two tracks flawlessly for a half hour. I have now hooked up a separate switch to the aux power hook up to the TIU and wifi, which I plan to just keep on. Another switch turns my 2 MTH Z-100's off that power fixed port 1 and 2. I plan on just keeping the wifi and TIU powered up, since I have so much trouble getting it to come back up correctly.

Last edited by kenny1wk

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×