Skip to main content

Hey everyone. I just installed a Atlas 3 rail #7.5 left turout. When I run a Lionel full scale berkshire going across the straight section of the switch. There seems to be a dead spot where the engine loses power. On the left part of the switch the engine runs across it smooth with no issues. Whats the fix?

Original Post

Replies sorted oldest to newest

@BigS06 posted:

Hey everyone. I just installed a Atlas 3 rail #7.5 left turout. When I run a Lionel full scale berkshire going across the straight section of the switch. There seems to be a dead spot where the engine loses power. On the left part of the switch the engine runs across it smooth with no issues. Whats the fix?

First, measure the distance between the pick-up rollers on your model. Second, measure the distance between the hot/center rails of the turnout. If the spacing of the pick-up rollers is less than the spacing of the center rails "gap", i.e. dead spot, then you have a problem. You may have to add a 3rd pick-up roller on the tender of your model.

Do a SEARCH, Blue line top of page.  Either Atlas 6924 relay board, or Power Routing, through turnouts.  Atlas, Ross, or Gargraves  usually provides power routing details/diagrams with  their switches.  DZ 1008 latching relay would be another SEARCH that would provide information about turnout problems.

Last edited by Mike CT

It's fairly easy to add a one-wire tether connection between the locomotive and tender to share pickup power.  I've done this to most of my smaller steam, and even some of the larger ones with only two rollers on the locomotive.

As Mike points out and I also mentioned, there are many solutions to switching fixed rails to center roller for one path through the switch to minimize dead spots.  For some switch configurations like longer switches and especially the Ross double-slip switch, powering normally dead rails based on switch path is pretty mandatory to allow small powered units to make it through.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×