Skip to main content

Replies sorted oldest to newest

gunrunnerjohn posted:

There you go, blaming the TMCC Buffer!

Signal strength low will inhibit adding new locomotives, even though you can run ones already loaded in the remote.  I'd first remove the passenger cars and see if that helps.

FWIW, this is why my LED lighting modules all include a 22uh choke, frequently DC power supplies from track power affect the DCS signals.

I'm going by his other post GRJ. He said he unplugged the TMCC booster and his system worked again.

Sometimes some users only post little bits of info and then don't respond to helpful steps.

Last edited by Engineer-Joe

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×