Skip to main content

It all started with a persistent short circuit in my ZW transformer.  I finally unhooked the thing for bench testing, and it ran fine!  Can't imagine what the problem is...

GEDC2030

So, bid a fond farewell to the glorified test track that has served me well for over a decade...

GEDC2029

And especially farewell to that Chic Sales wiring nest! 

The general plan is to strip the 4 x 8 down to the bare wood, put a layer of Homasote on top and actually fasten the track in place!  With wires underneath and all!    The existing 1x2 perimeter frame will be discarded in favor of a 1x3 frame with clearance to run wires, while still fitting nicely on the old dining room table that serves as its legs. 

Here's a sneak peek of the track plan: 

Gfx_RTC Rework 20.12.03

As you can see, I'm retaining the essential test track ethos, with a figure 8 oval thrown in for grins and giggles.  The main difference is the bump and go test track.  Since a substantial proportion of the RTC fleet is bump and go trolleys, I figure a dedicated test track for 'em is in order... 

The fact that the layout will bear a demented grin is merely coincidental.    Honestly.   

Anyhow, watch this space!  I'll probably start work in earnest after the holidays.   

Mitch

Attachments

Images (3)
  • GEDC2030
  • GEDC2029
  • Gfx_RTC Rework 20.12.03
Original Post

Replies sorted oldest to newest

@Scotie posted:

Sorry to see it go but there's nothing worse than trying to find a problem in wiring "that just grew".

You've read the advice here before but different colors for different functions and labels wouldn't hurt.

We'll be looking forward to the new and improved--

Thanks, all!  Actually, what I plan to do is fairly simple wiring.  Feeder wires to diagonal corners of the ovals, a feed to the bump and go track (using the antiderail feature of a 1022 switch to control the siding) and feeds from the front switches to their diagonal opposites so that both ends are straight or turned at the same time.  Other than a couple of wires for lights and such, that'll be it.  I figure I'll paint the Homasote in the garage, and do the rest of the assembly in the living room, stapling the wires to the plywood underneath as I go....

Mitch

Accompanying a redo of former layout wiring patterns comes wisdom on how to do it better (at least differently) next time. I've built several garage-based O-gauge holiday train layouts, and I improved the wiring scheme and pathways with each re-doing during 12 years of being Santa's toy train helper.  Here are my "tricks of the trade" - although not a "secret" among hobbyists. Others may offer practical tips.

1)  Color-coded wire pairs according to function:  track power, accessory power (usually fixed 14 v), lighting for buildings (usually 12 volts DC), 5.5 v for Miller signs, etc. Although some hobbyists are committed to wire labeling, I'm not a neatnick. My layout isn't big enough for NASA-style wiring practices.

2)  Terminal strips for junctions (by Radio Shack online), and the nifty 12 or 24 connection terminal strips by MTH.

3) Spade lugs soldered to ends of wires for goof-proof wire connections. Time-consuming up front, but worth it.

4) Lots of plastic cable ties to support wires along their path to avoid the "explosion in a spaghetti factory" look.

5) Bus wiring with feeders along the routes to lock-ons. I prefer the Lionel lighted lock-ons for a quick visual check-up of all active track power connections. i know - some hobbyists prefer to hide all track wiring. I envy their fastidiousness, but not enough to join that fraternity.

6) Lionel metal lighted bumpers at the end of sidings. The track power wires connected to each siding can be connected to toggle switches to show on/off of track power for each siding.

7) Wiring to accessories mounted on the perimeter fascia board adjacent to each accessory. I favor Lionel #90 momentary contact pushbuttons or the classic slide switch for on/off control.

8) Master power switch for the entire layout - one switch kills all electricity.

And so it goes ...

Mike Mottler    LCCA 12394

It all started with a persistent short circuit in my ZW transformer.  I finally unhooked the thing for bench testing, and it ran fine!  Can't imagine what the problem is...

So, bid a fond farewell to the glorified test track that has served me well for over a decade...

And especially farewell to that Chic Sales wiring nest! 

The general plan is to strip the 4 x 8 down to the bare wood, put a layer of Homasote on top and actually fasten the track in place!  With wires underneath and all!    The existing 1x2 perimeter frame will be discarded in favor of a 1x3 frame with clearance to run wires, while still fitting nicely on the old dining room table that serves as its legs.

Here's a sneak peek of the track plan:

Gfx_RTC Rework 20.12.03

As you can see, I'm retaining the essential test track ethos, with a figure 8 oval thrown in for grins and giggles.  The main difference is the bump and go test track.  Since a substantial proportion of the RTC fleet is bump and go trolleys, I figure a dedicated test track for 'em is in order...

The fact that the layout will bear a demented grin is merely coincidental.    Honestly. 

Anyhow, watch this space!  I'll probably start work in earnest after the holidays. 

Mitch

Remember to scrounge ( I particularly like the Demented Grin) What about the Royal KITTEH?

miglet

Last update of 2020! 

Vehicles and buildings removed...

GEDC2045GEDC2046GEDC2047GEDC2048

As Fortescue supervises operations from the rear platform of his private sleeping car...

GEDC2049

...Sylvia Siamese is astonished by the change!

GEDC2050

Meanwhile, Norma Bates Kitteh wants to know, "Where mah trains at?"

GEDC2052

Before tearing the track up, I decided to mock up the final track plan to get an idea of what it looked like.

GEDC2053

Norma, of course, offered somewhat sketchy assistance.

GEDC2054

A less than fond farewell to Chic Sales wiring!

GEDC2055

And here, I think, we'll leave things until after New Year's...

GEDC2056

So, I let some of Miggy's sheep out to graze until then.

GEDC2057

Mitch

Attachments

Images (12)
  • GEDC2045
  • GEDC2046
  • GEDC2047
  • GEDC2048
  • GEDC2049
  • GEDC2050
  • GEDC2052
  • GEDC2053
  • GEDC2054
  • GEDC2055
  • GEDC2056
  • GEDC2057

Big work going on there.  The changes will add to operational enjoyment.  I'm glad you are letting the sheep graze.  Two thumbs up.

@O Gauge Jim posted:

Hey Mitch, it looks like you and Norma are having a great time with the rebuild. By the way, how are your giraffes doing during this pandemic? Hope you have them safely masked up.Have a Great New Year  and stay safe.

And to you, Jim!

As for Fortescue, he's socially distancing. 

GEDC2058

Attachments

Images (1)
  • GEDC2058

I decided to run at least one train for New Year's.  While the inner tracks are only mocked up and not in running condition, the original outer oval is still intact (for now), so I decided to break out one of the orphan trains I rescued a few weeks back...

The little 242 ran like a champ, as did the original 35w transformer.  In fact, once I oiled all the wheels, I had to dial back the transformer a bit so the train wouldn't overspeed!    Interesting fact:  This plastic-shelled locomotive sports a traction tire,  something I thought started in the MPC era... 

GEDC2059

Naturally, Norma Bates Kitteh got into the act.

GEDC2060

As did Sylvia Siamese.

GEDC2063

Even Fortescue was on hand...

GEDC2064

...stopping to confer with the sheep in what I suspect is going to become known as "Miggy's Meadow". 

GEDC2065

Ya know, in this era of Bluetooth remotes, digital controls and all the alphabet gobbledygook,  sometimes it's nice to just get back to basics, run a simple train around a simple oval and bask in the smell of ozone and 3-in-1 oil...

Happy New Year, all! 

Attachments

Images (5)
  • GEDC2059
  • GEDC2060
  • GEDC2063
  • GEDC2064
  • GEDC2065

2/26 Update:  Going to be using the RTC's grass mat at the NW Arkansas Train Show,  so it's finally time to take up tracks, with Norma Bates Kitteh's assistance.  However, once it became clear that Train wasn't going to be happening, she decided to clear out...

GEDC2144

For the first time since 2007, the plywood sheet sees the light of day. 

GEDC2145

Mitch

Attachments

Images (2)
  • GEDC2144
  • GEDC2145

May update: 

Temporary tracks taken up, now that the past month or so's bout of rotten weather is over, at least for now...

GEDC2228

The plywood did not leave without a fight, though...

GEDC2229

But eventually, I wrassled it into the garage for future Homasoting.

GEDC2231

Given the difficulties in getting the plywood out (the boxes on the table contain the rollling stock of the lefthand module of the Howard Roark Memorial Train Storage Facility; the Facility module in question is currently in the living room), I'm rethinking in terms of relocating the RTC to the workshop proper, and turning this room into the library...

GEDC2230

Temporary service is being provided.  While Norma takes her afternoon nap, Assistant Supervisor Sylvia Siamese is on the job...

GEDC2234

Mitch

Attachments

Images (5)
  • GEDC2228
  • GEDC2229
  • GEDC2231
  • GEDC2230
  • GEDC2234


GEDC2234

Mitch

BREAKING NEWS: @M. Mitchell Marmel, Grand Pooh-bah of the Razorback Traction Company, has been hospitalized after his foot was flattened by a falling mid century modern transformer. After recent labor unrest, the assistant shop supervisor (who was seen in the area around the time of the “accident”) is being sought as a feline of interest... film at 11:00.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×