Skip to main content

I took delivery of a dozen pre- and postwar tinplate cars from Trainz.com.  All told, less than $4 each, and well worth it: 

GEDC2380GEDC2381

A somewhat down-on-its luck Marx tender:

GEDC2382

After a bit of bashing, it's gone from "hopeless" to merely "somewhat distressed"...

GEDC2383

My 666 has some proper rolling stock to pull! 

GEDC2384

Also took a prewar American Flyer coach out for a spin...

GEDC2385

And some postwar Marx flatcars joined the fun!

GEDC2386

One way to get that old tender moving... One appreciates the artistry of Marx lithographers.

GEDC2387

Bad axle on a prewar Lionel tank car.

GEDC2388

This is what junk boxes are for! 

GEDC2389

My 148 did well with its new consist...

GEDC2390

And, yes, latch couplers work just fine with box couplers! 

GEDC2391

As a bonus, all the electromagnetic couplers work! 

GEDC2392

All in all, money well spent! 

In the background:  An unholy amalgam of a Lionel Vulcan chassis and a Pittman work car body.  Someday, it'll be a snow sweeper. 

Mitch

Attachments

Images (13)
  • GEDC2380
  • GEDC2381
  • GEDC2382
  • GEDC2383
  • GEDC2384
  • GEDC2385
  • GEDC2386
  • GEDC2387
  • GEDC2388
  • GEDC2389
  • GEDC2390
  • GEDC2391
  • GEDC2392
Original Post

Replies sorted oldest to newest

If you have a tunnel on your layout you could use that tender to have some fun with visitors.  Before they arrive, take your best looking engine, cars etc. and assemble them in a consist with the tender hidden in the tunnel.  After everyone has gathered around to watch the trains , turn on the one set and as the tender emerges from the tunnel exclaim, "Oh good grief - I thought I fixed that water leak behind the tunnel!"

If you have a tunnel on your layout you could use that tender to have some fun with visitors.  Before they arrive, take your best looking engine, cars etc. and assemble them in a consist with the tender hidden in the tunnel.  After everyone has gathered around to watch the trains , turn on the one set and as the tender emerges from the tunnel exclaim, "Oh good grief - I thought I fixed that water leak behind the tunnel!"

Hah!  Worth it to put a tunnel in just for that gag... 

Many years ago I did something similar with a mousetrap.  My layouts have always been floor setups.  I took a mousetrap - carefully soldered it shut so it wouldn't snap shut unexpectedly - added a fake piece of cheese and put the assembly near one of the tunnels.  When my guests came over I would start the trains running and in fairly short order someone would notice the mousetrap and ask about it. I would sigh and say,"I've been having some trouble with mice lately so I'm hoping that will put an end to it."  As I was saying this I would apply power to the track going through the tunnel and out of the tunnel would come a Pride Lines Mickey Mouse handcar. Before anyone could say anything I'd say "See, what did it tell you, there's two of them right now!"  It never failed to get a good laugh.

As I was saying this I would apply power to the track going through the tunnel and out of the tunnel would come a Pride Lines Mickey Mouse handcar. Before anyone could say anything I'd say "See, what did it tell you, there's two of them right now!"  It never failed to get a good laugh.

I'm minded of an HO trolley modeler who took a tin toy mouse, mounted a single truck motor, replaced the tail with a trolley pole and sent the little thing scurrying around the layout at trolley meets... 

Mitch

You too can get the same results! All you need is a damp basement and half a century! 

Mitch

Spent a lot of time and effort preventing the damp basement, and the only half century I'll get is in the rearview mirror. 

Hope you keep the tender the way it is.  IMO, it's worth more as a conversation piece in the gags that others have suggested.  If you want a nice one, it shouldn't be too hard to find at a reasonable price.

@Mallard4468 posted:

Spent a lot of time and effort preventing the damp basement, and the only half century I'll get is in the rearview mirror. 

Hope you keep the tender the way it is.  IMO, it's worth more as a conversation piece in the gags that others have suggested.  If you want a nice one, it shouldn't be too hard to find at a reasonable price.

Yeah, I think it's gonna be kept as-is.  I like the patina. 

Mitch

I took delivery of a dozen pre- and postwar tinplate cars from Trainz.com.  All told, less than $4 each, and well worth it:

A somewhat down-on-its luck Marx tender:

After a bit of bashing, it's gone from "hopeless" to merely "somewhat distressed"...

One way to get that old tender moving... One appreciates the artistry of Marx lithographers.

GEDC2387

You've done the old girl proud Mitch. Maybe a light spray with some clear to seal it and prevent further deterioration?

Bob

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×