Looking to purchase a Cricut machine to relabel some og my fantasy painted “O” and Standard gauge projects with perming vinyl.
Has anyone ever used this machine for this this purpose. I know they may be a problem with very small fonts, but should be able to use it with a larger font.
Replies sorted oldest to newest
I recently used my wife's to renumber a steamer. Just have to be careful getting the letters out of the vinyl and when transfering, but it worked even for those small numbers. I went over it with clearcoat as well. I can't tell you how it will hold up long run, but so far so good.
@Burl could post some pics???
I use a Brother Scan n Cut2. I don't do vinyl. Instead, I use it to make stencils for spray painting. I apply a temporary adhesive to the "back" (you print it in reverse), press everything in place, spray paint it a couple times, peel it off and call it a day. It does NOT work well for small fonts nor does it work well on surfaces with protrusions. Anything less than a quarter of an inch is pushing it. (That's not to say you won't get better mileage than me.)
Anthony
Here is a pic of the cab numbers I did on the Cricut. They are little crooked, but that's my lack of steadiness in applying, not a shortcoming of the Cricut.
Question for you Burl, what was the name of the font you used? Did not get a machine yet, but looking and getting the money up😊
Fellas, the blade is everything!!!…..you must have a descent blade…..I’m not sure what the Cricut machine uses, but my graphics guy uses some sort of special blade made in Germany for his machine, I can certainly ask him what he uses, and if he’s familiar with the Cricut ….my graphics guy has some big honking machine, and when he switched the blade out for this special blade he mentioned, it was like night and day difference ……also, the type of vinyl he uses is so oober thin, it’s like pad printing when he’s finished……the blade he uses makes weeding the letters and numbers super easy……you can’t argue with results like this: ….custom painted and graphics on a C&O Greenbrier Presidential Special….yes, all of that is vinyl application…..
Pat
Do not have a machine yet looking at the Explore Air2 and the Maker. Which one do you use?🤔
Sorry Ron, just saw your post! I used Tahoma for the numbers, and for the below which I did today, used Calibri for the letters. Again, a little crooked but that's me. The trick is getting the letters separated from the vinyl and then getting them straight again before putting the transfer tape on them. Still, I'm pleased. Much easier in my opinion than decals, and I make anything I want.
Access to this requires an OGR Forum Supporting Membership
