Skip to main content

Replies sorted oldest to newest

@coach joe posted:

To help distribute the power to my tubular track loop more evenly I want to use multiple lock-ons.  Does it matter if the  the No. 2 rail connection of each lock-on is connected to the same outer rail?IMG_3124

No as long as it is always the same phase, then it’s fine.(meaning the same post on the transformer)

Last edited by ThatGuy

Both rails are the same electrically... to quickly visualize:

Clip 2 of them onto a single piece of track on opposite sides,(optionally place a piece of rolling stock on the track), and make a quick study of the circuit.

Or, clip just one to a piece of track at the throat of a reversing loop switch and follow the power route around the loop and back out.

Last edited by ADCX Rob

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×