Skip to main content

Trying to activate postwar accessories (gateman, x-ing gate, etc) using insulated track.   Works fine when the simple loop of track is not connected to DCS.  

When connected to DCS  (fixed 1) the insulated track sections do not activate the accessories.   I have the DCS Companion but could not find what I need to figure this out.

Any way to solve this?

Any help would be appreciated.

Thanks,

Paul

 

Original Post

Replies sorted oldest to newest

Barry,

I am using a circle of super o track 5’ x 9’.  Four power districts, all connected to fixed 1.

Center rail is isolated on all power districts.  One DCS power feed per block.

Common ground is connected on the inside outer rail.  Insulated track sections (with non metallic pins) are on the outside rail.

Paul

 

 

 

 

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×