Skip to main content

I just finished wiring a Ross 4-way turnout using a DZ1000 motor. First was to connect power and make sure the switch was working properly. Second was adding the non-derail feature. This W/E I added the DZ1011R signal detector in conjunction with a DZ1008 relay to indicate turnout position. The attached diagram is for one section only. You will need three pairs of DZ1011 / 1008 for the 4-way.

Joe

Attachments

Original Post

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×