Skip to main content

I recently purchased a Weaver 3 rail John Wilkes. Looks like it was never run as it has no noticeable wear on wheels or pick up rollers. Read through the operation instructions and it seems to be stuck in the initial reset state on power up. Lights come on but that's it. Tried replacing the battery with a BCR but no change.

Any suggestions on how to proceed?

Thanks, Scott

Original Post

Replies sorted oldest to newest

I don't have anything to offer but I do have a question - how did you manage to get the John Wilkes tender shell off of the tender chassis?  It's no problem removing the screws and separating the shell from the chassis.  The problem I have is the curvature of the shell on the bottom is such that I cannot find a way to maneuver the shell/chassis to separate the two.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×