A JEP electric steam loco from 1937, it runs forward only. There is many variations of those middle range steamers, with or without reverse, light and different tenders.

IMG_9467IMG_9468IMG_9469

Have a nice weekend,   Daniel

Attachments

Images (3)

As you might know I like (and collect) the cars of the luxury CIWL trains that ran in Europe. Here is a very simple small tinplate blue sleeping car that was made by Grötsch from Germany in the fifties; it runs on H0 gauge rails.

For comparison I photographed it next to an (almost finished) sleeping car in 1 gauge that I made from a kit (no tinplate):

mceclip2

Many pictures of the 1 gauge CIWL car can be seen here http://sncf231e.nl/amati-kit-f...iwl-lx-sleeping-car/  and in the video:

Regards

Fred

Attachments

Images (4)

Nothing fancy in legitimate collectingwise for me this week but I did get one item locally that although tinplate is not O gauge ...

but I could not leave it sitting there all sad and alone so it had to come home with me ..

A Lines Bros Triang Express ride on for toddlers or pull train for older kids from the 50's

Unfortunately his factory nose took a beating from a previous generation and was replaced in a bodgy repair .. but he was obviously well loved !

Last edited by Fatman

A made-for-the-US-market generic Fandor passenger set - no names on the headboards of the car and a very fragile sheet metal cow catcher applied to a generic European style steam engine.  Engine and cars are all lithoed sheet metal.

Set_Fandor_Steam_Large_Passenger

Attachments

Images (1)
Robert S. Butler posted:

Tinplate Art - no, no box for this one.

Most feel the trucks on the coaches look primitive but I like them. Wide T-Truck?

Robert S. Butler posted:

A made-for-the-US-market ... a generic European style steam engine.  ....

i wouldn't want to be the fireman on this locomotive...!

Attachments

Images (1)

The Cabo King strikes again.  Some may remember that I've been intrigued by two continental manufacturers --Kibri and Cabo.  Each made wonderful painted tinplate stations and had a history dating back to the late 19th century.  Many of us know Kibri as a producer of HO plastic.  But back in the prewar period from 1920-1940 they produced both large and small metal stations.  The pictured 52-3 is an example of Kibri at its finest.

But Cabo is virtually unknown and their large stations give Kibri a run for its money.  I own two large ones pictured below. (last 4 photos). Note the differences between the "balcony" and the "3 window" versions. I know of two other variations of this same station, but that is another story. Lew Schneider52-3 6 Barclay AN MANOIL HEAD ON ExcCabo Grand station Balcony 2 Excellent copyBalcony Cabo Close Up on LayoutCabo 3 Windows 1 Clock Front MineCabo 3 Windows 1 Clock Rear 2 Mine

Attachments

Images (5)

Waiting for new stuff to arrive. Maybe something new to show next week. Went overboard at a few auctions. Wondering when this illness will end? Wife is concerned.

Jim O'C  I didn't quite understand your post until I went back and looked at some of the other Fandor equipment I have.  It's true the passenger car trucks are plain looking but I can't decide if they are an early version or just a case of very worn stamping dies.

Fandor_Plain

Truck with more detail

Fandor_Detailed

  In any event - they are T trucks.

 

Attachments

Images (2)

A lazy August afternoon in Peacock ...

A common Lionel Outfit No. 296 (Code word "Dart" ... I like that!) in uncommon condition from 1928

acquired at York eleven years ago:

296 v2

A No. 10 (Code word "Pull"... I like that even better.) nicely restored by Hennings for me about nine years ago:

10 v5

Both run as if it was still the day after Christmas 1928.

Enjoy your weekend!

Bob

Attachments

Images (2)
Last edited by Bob Bubeck
Tinplate Art posted:

LEW: VERY NICE stations! May I suggest you move the log loader and gantry crane away from that NICE station - they are really not compatible!

I am working on this project right now. Don't have space to move the log loader and gantry crane, but by swapping the Cabo and Hornby stations I think there will be a big improvement.Stay tuned for more photos.

Thanks for the suggestion.

 

Lew

Tinplate Art posted:

LEW: VERY NICE stations! May I suggest you move the log loader and gantry crane away from that NICE station - they are really not compatible!

Here is the result of my efforts.  Hope it looks better. Many thanks for the advice.

 

Lew SchneiderCabo City Station New PositionNew Position Hornby StationTunnel and New Cabo Station Location

Attachments

Images (3)
lewrail posted:

The Cabo King strikes again.  Some may remember that I've been intrigued by two continental manufacturers --Kibri and Cabo.  Each made wonderful painted tinplate stations and had a history dating back to the late 19th century.  Many of us know Kibri as a producer of HO plastic.  But back in the prewar period from 1920-1940 they produced both large and small metal stations.  The pictured 52-3 is an example of Kibri at its finest.

But Cabo is virtually unknown and their large stations give Kibri a run for its money.  I own two large ones pictured below. (last 4 photos). Note the differences between the "balcony" and the "3 window" versions. I know of two other variations of this same station, but that is another story. Lew Schneider52-3 6 Barclay AN MANOIL HEAD ON Exc

Magnificent stations Lew.  Do the characters in red represent a 24 hour clock in the first photo?

American Flyer standard gauge 4696 "Brass Piper" engine and tender on the layout, pulling a freight train comprised of Lionel and Dorfan cars (along with a new GE Lamps hopper by MTH). To my eyes the Piper is one of the nicest looking standard gauge steamers.

American Flyer 4696 Piper engine and tenderAmerican Flyer 4696 Piper engine and tender 2American Flyer 4696 Piper engine and tender 3

Attachments

Images (3)
Videos (1)
American Flyer 4696 Piper engine and tender IMG_9068
Tinplate Art posted:

LEW: Much better!

Hi TA

Once you change something you look for even more things to change.  I pulled the French Hornby crossing out of the center leaving plenty of room for Minic buses at the Cabo Grand Station.  One part of the crossing then went over to the corner and the French Hornby Arras signal cabin moved into a cabinet display in the next room.  Moved the little Chien station to the other end of the layout and substituted it for a small AF station which in turn found a place in my other room.  So it goes. Tomorrow i'll probably make some more changes.  Who knows?

 

Lew

FDF85C26-062E-4FF8-A448-CABF86E69796

Sorry for the sideways pic.  Got this cute piece in a consignment shop while on vacation.

 

John - that Piper is beautiful!!  I wish mth had scaled one down to O gauge.

Attachments

Images (1)
George S posted:
jhz563 posted:

 

John - that Piper is beautiful!!  I wish mth had scaled one down to O gauge.

You mean like this one?

F225FEBF-9E2C-45B9-8F71-EB80230DB908

George

You bet!  Is that one you custom made?

jhz563 posted:
George S posted:
jhz563 posted:

 

John - that Piper is beautiful!!  I wish mth had scaled one down to O gauge.

You mean like this one?

 

George

You bet!  Is that one you custom made?

Yes, a 3300 series with custom piping.

Georg

Jim O'C posted:
Steve "Papa" Eastman posted:

 

Picked up at Pomona today.

Steve

1E37DC56-3EC6-41A4-892C-26C96DE8CBDB

 

1475 The Monroe

Nice wide gauge set, Steve?

It's pretty nice. I won't unload the car for a few days. Did run it on my Std Gauge layout at the show, squeals like crazy, but it runs. Inner loco box is decent, straight track box is rough. No other inner boxes.

Steve

gftiv posted:

IM000993

Ok - I need to know more about this engine - I'm thinking it was the one in Red Hall at York for the past couple of meets. Glad to see it on track, but curious as to it's heritage - who made it? do we know if it is the only one? Nice proportions. What did he use for the drive?


Jim

unknown primitive floor train with aluminum wheels 1.5-inch tall X 8-inch long. don't know who made it but had to have it. The description "blech Eisenbahn" (tin railway) in the original offering doesn't cut it.

tpk loco tender gondola

The gondola looks similar to TPK.

tpk loco tender gondola undersideTPK 5-car set w box

 

Attachments

Images (3)
Last edited by Jim O'C
419308ED-058A-46B2-BE0F-726B555ED65FJim Rawlings posted:

JIM Z...where did you find the 1/32 scale vehicles and figurines that you pictured recently?

Thanks.

Jim

Jim, 

Some  of the cars and trucks are from Fairfield Collectibles. I actually found some at a rest stop on the Indiana turnpike. You can search google or check EBay  for 1/32 scale  vintage vehicles.

I started with Barclay figures on left and didn’t like the size so I searched for smaller figures.

My favorite figures are the K-line-4201 set which was sold as standard gauge and also G gauge. This is the same set with two different names on the package.  The figures in the set shown are painted. I have also seen a set unpainted.

The figures on the right are from China bought on eBay.  I glue small magnets to the feet and use them in stations and other metal structures, cabooses and observation car platforms.

The 3 lead figures on the far right are #1 gauge from Europe. I found them on Ebay

Hope this helps,

Jim Z

 

 

 

Attachments

Images (1)
Last edited by Jim Z

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×