Skip to main content

I have a Rev L TIU and when I try refreshing the Remote software it finds the TIU on Com Port 6 and it starts telling me to hold the power button down and immediately tells me to release the power button and I see that it is looking for Com Port 6 again on the computer screen.  Does anyone know what COM Ports the TIU uses. I'm doing it via the USB port.  My current machine does not have a RS232 connection. Also it  appears the TIU is not recognized via the USB port. Looking thru the device manager I find what I believe is the TIU. Clicking on it and going through the properties I find the following error " Device USB\VID_0403&PID_6001\AH030XUA requires further installation. Have no idea what I need to do.

Original Post

Replies sorted oldest to newest

The quote below from this forum topic, "cant get new update to load on any TIU", may help.

"You'll need to go to your device manager and expand Ports (COM & LPT).
Take note of what is listed and then plug in your TIU and see what changes, the new COM port number is the one you want to select in the CONUMER LOADER, from the Options drop down menu serial port setting.

Also remember that MS Windows will track the which USB port you plug your TIU into. If you plug your TIU into a different USB port, Windows will create a new COM Port to access it."

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×