Bruce Jacobsen posted:

Finished the cables on the suspension bridge and test fit it on the table.Bridge

That is an incredible structure, Bruce, and it will be a wonderful addition to your layout. Great job!!!

Paul

Techno-Peasant of the First Order

Provisionary Member - Brotherhood of the Crappy Basement Layout

 TCA 15-70689

LCCA RM-39621

LOTS RM-9326

I put the first coat of paint on the turntable pit and installed the pit rail. I also roughed in the turntable bridge shape (I'm basing the turntable bridge on the Santa Fe girder type). Still a long way to go. As of today I'm $60 in materials into this turntable project. I think when it's all said and done I won't top $100. As of now it will be a manual turntable, unless I get the gumption to power it with one of the spare car window lift or antenna motors I have in the garage. 

20190823_195001

Santa Fe, All the Way

Attachments

Photos (1)
Lou1985 posted:

I put the first coat of paint on the turntable pit and installed the pit rail. I also roughed in the turntable bridge shape (I'm basing the turntable bridge on the Santa Fe girder type). Still a long way to go. As of today I'm $60 in materials into this turntable project. I think when it's all said and done I won't top $100. As of now it will be a manual turntable, unless I get the gumption to power it with one of the spare car window lift or antenna motors I have in the garage. 

20190823_195001

Looks great! Would love to hear more details on the materials used and how you did it. How long is the bridge?

JD2035RR posted:
Lou1985 posted:

I put the first coat of paint on the turntable pit and installed the pit rail. I also roughed in the turntable bridge shape (I'm basing the turntable bridge on the Santa Fe girder type). Still a long way to go. As of today I'm $60 in materials into this turntable project. I think when it's all said and done I won't top $100. As of now it will be a manual turntable, unless I get the gumption to power it with one of the spare car window lift or antenna motors I have in the garage. 

20190823_195001

Looks great! Would love to hear more details on the materials used and how you did it. How long is the bridge?

The turntable has a 30" bridge to fit my largest locomotive, a MTH Premier Santa Fe 2-10-4. I didn't go any bigger as the only scale articulateds I'd buy would be either a SP cab forward or AC-9, neither of which would fit on my layout (I only buy Santa Fe or Southern Pacific locomotives). 

So far materials used are 1X4 pine, 1/2" plywood, 1/4" plywood, some 027 curved rail, and a lazy susan bearing. The pit is almost done. The bridge is going to take much longer, as I've got a bunch of details to add to it.

Santa Fe, All the Way

I put in a 12 hour day and have little to show for it.  I finished drilling the new holes in my control panel.  It took a long time and a rat tail file to make nine SAE holes into metric holes.  Next up was a good coat of primer, front and back.  I sprayed a light coat of "BRM" green followed by a way-to-heavy top coat.  I'll have to sand and try again tomorrow.  I decided my next adventure should be simple.  I intended to mark the power cords on my two transformers for proper phasing.  But... when I fired up my "Type S", I had no voltage on A or B to common.  I read my "Greenberg's Manual" before taking the cover off the transformer.  I found the wiper badly bent and making no contact.  A small pair of needle nose pliers made that all better.  I failed to take a before photo.  I cleaned everything and put it back together.  Once again, the dinosaur lives.  Now I have a second supply to power my switches.  Finally, I marked the plugs for correct phasing.  I will be on my ham radio tomorrow until noon.  Join me on 7.251 MHz if you can.  Sanding and painting the control panel will follow.

73 and good night,

Bill

Attachments

Photos (2)

Bruce, The bridge looks great!  What did you use for the cables, and how did you attach them on either end?

Lew, That's a good idea to try out different track configurations to see what you like best!

Lou, The turntable is looking great!  I'm with you, the well done commercial ones are way over my budget.

Bill, Looks like you will be in good shape now.

Thanks Mark. I used 6 strand metallic embroidery floss. On the bottom of the bridge roadway I drilled 1/4x1/4 counter sinks and then cut a channel between them all with a dremel. The floss was just over 8 yards, so it was just enough for one side. After feeding it thru all the holes we double knotted the beginning and then filled the counter sink with hot glue. After it was stretched taught the last hole was filled with hot glue and then the tail was laid in the groove and hot glued again.Bridge2

Attachments

Photos (1)

Vincent, The Coca-Cola bottle cap facility looks good, but most of all looks fun!

Brian, nice Santa Fe's! I am glad your having fun! Wonderful photo's Thanks for sharing them with us!

Ed, The wooden deck turned out looking wonderful! Nice work!

Lew, That is quite the undertaking! But I would have to say it really turned out looking good!

Bill, take care and keep us posted as you go along! Sounds like you have a lot of work ahead of you but I can only think its all going to be for the better!

Bruce, The bridge looks great! Wonderful work!

Lou, the turn table it really looking good! I also like the price!

Well folks its Sunday and I hope everyone has had a great weekend! I hope to get out to the train room today to do something, maybe work on my new crane!

Everyone have a great Sunday and please have some fun!

Mike

USMC 5/11 Battalion Oscar Battery 155 Big Guns!

Semper Fi !

Menards addiction Meeting member! /  LCCA# 41824

No pictures but me and my son finished all the plaster cloth.  Tomorrow we will put a base coast of white latex paint over the whole layout.   

The backdrop will ship on Monday and hopefully be here by Wed.  It will go on the wall and then the layout can go back in its permanent home for good!


Home of the Michigan and Great Lakes Rail Road.

See my Train Photography 3rd Coast Photography

 

Forum member since: 8/25/04

Did I do work on the layout?  That depends on your point of view. 

I put YLB Batteries in 27 of my steam engines to allow the engines to pass over my Atlas O switches without the sound shutting off momentarily. The batteries made by Gunrunner John come in two ways.  YLB #10500 has the 9-Volt battery clip on the end. It clips to the battery clip in the engine. YLB #10510 has a plug that goes into the sound board socket. Both connect to the center roller power to quick charge the battery. The battery then provides power to the sound board as it passes over gaps in the center rail.

It has made running my Lionel steam engines an enjoyable experience.

Please note that the front end cow catcher and front scale coupler are missing from the Southern Pacific AC-12. They did not return on this engine that was serviced by Lionel two plus years ago. (I have been the only family member caretaker for my 92-year-old mother since her two hospital stays and transfusions), and did not open the repaired engine until this weekend when I put the YLB Battery in the engine. Do not trust Lionel Service to do things correctly. Immediately check everything.  This why some of my engines have gone back three times, and I have been refunded on two Warranty engines that could not be fixed.  I am reluctant to send my new Western Allegheny H-10 that just lost its Cab Light back for Lionel Warranty Service. This is not a complaint, but a statement of Fact.  Have a good week.

Sincerely, John Rowlen

Attachments

Photos (6)
Videos (1)
MVI_0803

What'd I do today? Daylighted a tunnel!

Before:

                   IMG_2833 [1)

Now:

          IMG_3757

           IMG_3759

Before:

            IMG_3756 [1)

Now:

            IMG_3758

No more switcher crews being asphyxiated in that tunnel while drilling the Paint Factory.

Lew

 

Operator of the Plywood Empire Route in the Beautiful Berkshires

Growing old is so much more fun than the only alternative.

Attachments

Photos (5)

Lew,  It looks nice.  Tunnels are great homes for spiders and mold and mildew, oh my.

The station looks good, especially when lights are in it.

I worked on mine with interior details and found some O-scale beds for the loft window area from an Ebay Seller in Turkey.

Sincerely, John Rowlen

Attachments

Photos (5)

FL9TURBO2, Wow, very nice bridge, it’s going to look good with your trains running over it. Lew, I’m glad there’s light at the end of your tunnel, neat layout, John Rowlen, I like your thoughts, expressions, and art work, Yes, repairing your Locomotives is working on the layout, indirectly, Everyone, I hope you have a great week...709DC491-5D01-4B11-8110-44E9B5E088482792C55E-A4D3-4268-A666-A7024C59FA7B84C7EFA1-F4C5-47B3-82DB-BC1B010FD790

Attachments

Photos (3)

Lew, the new track arrangement looks great! Nice placement of the building to hide the hole!

John, great job on the station! Also the work on the engines are always what did you do on the layout! LOL

FL9TURBO2, Very impressive bridge! Al does amazing work!

Larry great photo's of your layout! But I missed the Red and Silver Santa Fe! LOL

I went out to the train room and placed an old Lionel steam engine I got from my grandson! Not my thing,but it needs to be on the layout somewhere! I know Lew I didn't take a picture so it didn't happen, I will post one tomorrow! 

I hope everyone had a great day and a good week coming up!

Mike

USMC 5/11 Battalion Oscar Battery 155 Big Guns!

Semper Fi !

Menards addiction Meeting member! /  LCCA# 41824

 

 

    

              hope everyone had a good weekend... it sure was nice out !

 

         I had a helper while waxing my truck yesterday...

                                                think he was checking out the finish for me...

 

                 try to have a great Monday !!       mine started out a little hazy...

    

        

    

        

 

 

Attachments

Photos (4)
briansilvermustang posted:

 

 


     

              hope everyone had a good weekend... it sure was nice out !

 

         I had a helper while waxing my truck yesterday...

                                                think he was checking out the finish for me...

 

 

                 try to have a great Monday !!       mine started out a little hazy...

    

        

        

 

 

I don't think I've ever seen this 2-2-2 locomotive before Brian. Who makes it?

The big question is - how many cars can he pull?

Three Rails Are Better Than None 

Bob, I can only say I ever saw one of these 2-2-2 engines even move, and it wasn't pulling any cars.  Maybe Brian tried it out!

Larry, Great photographs as always!!

Yesterday, I finished spraying the rock textured paint on the rest of my roadbed.  I'm letting it all dry well before putting down the track.  Things are a bit of a jumble, so no photographs

Brian, Nice photos! does Izzy know that your hiring extra help to take care of things around the place? LOL

Shawn, Nice work on the fascia! Looks wonderful!

Larry, you could post photos of your layout every day and I would still be excited to see them! You have such an impressive layout I wish I lived closer to come and see it in person!

Nothing in the train room today as the wife had different ideas. We relocated a rose garden and cleared an area for a new deck! This summer sure has been killing my train room time, I am ready for winter! LOL

Mike

USMC 5/11 Battalion Oscar Battery 155 Big Guns!

Semper Fi !

Menards addiction Meeting member! /  LCCA# 41824

I got up the courage to dust off and run my Vision Line Big Boy #4014 while I was putting YLB Batteries in my other steam engines.  There isn't room in the Big Boy Tender for a battery.  I was able to get the steam blow-down effect to work on this engine for the first time.  That was a nice surprise.

Sincerely, John Rowlen

Attachments

Videos (1)
MVI_0811_TrimBigBoy1

I sanded and seam sealed the turntable bridge. I also test fit the control house. Still a ways to go. Have to add girders to the bridge sides, add the overhead power arch, paint the bridge, and paint/detail the control house. Oh and add track to the bridge. 

20190826_220909

 

Santa Fe, All the Way

Attachments

Photos (1)

Tonight was the first time I've run trains at length since late April/early May.  My oh my was it fun!!

Snapped a few photos too ...  and included two photos of my new ( to me ) K line B&O F3 A&B units on the service track.     IMG_9651IMG_9675IMG_9681IMG_9710IMG_9718IMG_9749IMG_9758IMG_9645

Cheers and Happy Railroading,

Patrick W  

CEO - The Free State Junction Railway 

" Where the music is sweet and the trains always run on time"

Home Office - Patsburg, Maryland 

Attachments

Photos (8)
leapinlarry posted:

Briansilvermustang, Beautiful diesels as always, Mike G, thanks for the nice comments, Kreuz, Shawn, very nice train table, your going to have a lot of fun, also, you have a nice train area....Everyone have a great rest of the week...F0E5ABB6-23C9-42B7-925E-28952CEEB3374ABB518C-18DF-48BB-A972-9DEB9A3DC8DB4BB015E2-6C21-4FBB-992F-14B5C9CD6B3F0B1DC257-AB33-4B1F-A30C-7A59AB36AEB7039EC84D-3C8B-4A45-AB90-6FCAED283677

Your layout looks great Larry!  Love the GG1 and the Santa Fe F units ... beautiful! 

Cheers and Happy Railroading,

Patrick W  

CEO - The Free State Junction Railway 

" Where the music is sweet and the trains always run on time"

Home Office - Patsburg, Maryland 

Diverging Clear posted:

ALDOVAR: Your photos are not showing up for me. Your previous post was the same way. I thought I'd let you know, for I like seeing pictures of your layout.

Rusty

I think what happens is that I just copy paste the pictures into the thread and they don't attach. Take a look now. :-)

-Ed, O-27 trains and track, building out our little train empire one piece at a time.

 

KE8JLT

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×