All I can figure out the a just 2 options.
Drill 1 hole to push cord down out of the way through table top by assessors then drill another by track to push up through table to plug it in
Or
2. Lay cord around the top of layout fastening down with either glue of cable fasteners then hiding it with landscape material.
I have one right area where I will have 3 accessories plugging in into a 3 plug multi strip track.
What do you do?
Replies sorted oldest to newest
Here is a post regarding the Lionel Bluetooth Radio Station that might help:
https://ogrforum.ogaugerr.com/...etooth-radio-station
You will need to scroll about half way down the thread to read about options. There is a comment about an adapter plug you can purchase. However I chose the second option to cut the plug off in this case and hard wire it as noted in the post. Hopefully this helps!
I chop the plugs off and wire the the old way direct to the power source hiding the wires.
I'm going to leave the plugs on thinking I'll lay down on top of the layout, fasten down with cable fasteners, then cover with landscape material, trees, & lichen.
Don't want to drill anymore holes in table top
I have used the direct to track method years ago when you had option to buy accessories with it, didn't really like wiring to track or transformer post.
Thx for your suggestions though.
Access to this requires an OGR Forum Supporting Membership
