I picked these up recently:
These uninsulated, disc type drivers (with small, 2 rail flanges) measure a full 84" (spoked driver is All Nation, just for comparison); dunno if those unfinished rods are for these drivers or not. I would have to think this was for some outside 3rd rail engine...?
I'm guessing this is Lobaugh (wheels are insulated):
Any guesses? 
Mark in Oregon
Replies sorted oldest to newest
Drivers - Lobaugh, for an ATSF Hudson. You are lucky to get LCWT, because HCWT castings are seemingly in abundance.
I believe the trailing truck is one variant of the Lobaugh Challenger truck, but it is too early to find the catalog.
Difficult to tell on the rods, but check the siderod length by laying them on the drivers. They look more like Mountain rods.
@bob2 posted:Drivers - Lobaugh, for an ATSF Hudson. You are lucky to get LCWT, because HCWT castings are seemingly in abundance.
I believe the trailing truck is one variant of the Lobaugh Challenger truck, but it is too early to find the catalog.
Difficult to tell on the rods, but check the siderod length by laying them on the drivers. They look more like Mountain rods.
Email sent...
Mark in Oregon
Bob2 now has those drivers...so maybe we can hope for some sort of end result! 😁
Mark in Oregon
Going to be a Sunbeam Pacific in 17/64. Maybe not right away.
"All good things come to those who wait...". 🙂
Mark in Oregon
Access to this requires an OGR Forum Supporting Membership
