Skip to main content

Well Gentlemen, I am pleased to announce that I have successfully brought another 2034 back from the junk pile. After a new E-Unit, cross heads, and bending the pilot to clear the front wheels, it is running like new. Cosmetically she still looks a little weather worried, but in time that will be corrected. In my experience it seems that the 2026 and the 2034 are the most common locomotives in need of repair.

On this MTH BN GP30 I painted the step rails white, added red paint to the fuel filler areas, painted the lower body frame area near the fuel filler cap a flat black and moved the horn (and painted it) to the left top of the body between the front  and middle radiator fans to make it look more like the prototype.  I also replaced the incandescent headlamps and amber flashing light on the cab with LEDs and had GGG up grade it PS2.  In the future I plan to add the conspicuity tape striping to the lower sides. 

 

Larry

 

IMG_0004[1)IMG_0005

Attachments

Images (2)
  • IMG_0004(1)
  • IMG_0005
Last edited by PSAP2010

Great idea for a thread, OGAUGEGUY!  I'm a little late to the party, and have a few "favorites", but I'll start with my very first diesel detailing project.   MTH RailKing Jersey Central ALCo RSD4 #1601 completed in May of 2014...

Started with this...

DSC_0029DSC_0016DSC_0018

Then made the following modifications/additions...

  • replaced molded-in (non-see-though) cooling fan/grille with metal fan and brass grille
  • added corner marker lamps and custom-built brackets
  • removed cast-in coupler cut levers and brake hoses from die-cast pilots and replaced with separately-applied versions
  • removed all molded-in body grab irons and replaced with separately-applied metal grabs
  • added pilot grab irons
  • added roof-top grab irons
  • added drop steps and safety chains to front and rear pilots
  • painted details such as step ends, pilot foot board ends, grab irons, handrails, cut levers, etc.

Then weathered it (of course!)...

...and ended up with this...

DSC_0010DSC_0004DSC_0006DSC_0013DSC_0015

I had so much fun the first time I decided to do it all over again to #1604!!

DSC_0003

DSC_02

Attachments

Images (10)
  • DSC_0029
  • DSC_0016
  • DSC_0018
  • DSC_0010
  • DSC_0004
  • DSC_0006
  • DSC_0013
  • DSC_0015
  • DSC_0003
  • DSC_02

08-Artic Diner Kitchen

1st Pic is a three car SP articulated diner set I kit bashed about twelve years ago for a sixteen car quasi authentic Coast Daylight consist  typical for 1941. The 2nd  Pic shows one of four sets of two car articulated coach’s for the same consist.  This was done several years before 3rd Rail (Golden Gate?) offered their superior versions.

3rd & 4th pics show the car vestibules made from c. 1/8” thick wood bulkheads covered with painted thin Sheepskin leather acquired from a former pipe organ technician. The white foam block inside provides just the right spring action.  

 

 

 

07-Artic Chair Vestibules09-Vestibule10-Vestibule bottom

Attachments

Images (4)
  • 08-Artic Diner Kitchen
  • 07-Artic Chair Vestibules
  • 09-Vestibule
  • 10-Vestibule bottom
Last edited by OddIsHeRU

This is my first post on this forum.  Thanks to all who have provided very helpful information on many topics, which I have read during recent weeks.

I have had the train consist in the video since around 1952-3.  It is the consist part of Lionel set 1477S (as detailed in Greenberg's Guide to Lionel Trains Vol II), which was given to me by my grandparents.  Since that time, I have wanted to somehow add a whistle to the tender.

The set was stored away for 30 years until recently.  I decided to try to add a whistle to the tender, and discovered that using a Williams by Bachmann True Blast II (R) Steam sound board would be a good way to add whistle and bell sounds.

In addition to the True Blast II, I needed a way to activate it, and a way to connect to the middle rail.  My only transformer was the 1034, so I decided to purchase a CW-80, after reading many comments about it on line.  A 581-10 roller pickup was added to the forward truck to connect to the center rail.  That installs easily.  AWG 24 high flexibility stranded wire was used to connect to the 581-10.  Fine sandpaper was used to optimize electrical conduction from wheels to the tender frame; truck top surfaces and frame bottom just above each truck's top surfaces were cleaned to bare metal.  A round head machine screw, star-lug, and nut were installed in an existing hole in the frame to electrically connect to the frame, after scraping away the paint immediately around the hole top-side.

I had intended to add center rail pickups to both trucks, but the True Blast II has worked well using only one pickup.

OddIsHeRU posted:

08-Artic Diner Kitchen

1st Pic is a three car SP articulated diner set I kit bashed about twelve years ago for a sixteen car quasi authentic Coast Daylight consist  typical for 1941. The 2nd  Pic shows one of four sets of two car articulated coach’s for the same consist.  This was done several years before 3rd Rail (Golden Gate?) offered their superior versions.

3rd & 4th pics show the car vestibules made from c. 1/8” thick wood bulkheads covered with painted thin Sheepskin leather acquired from a former pipe organ technician. The white foam block inside provides just the right spring action.  

 

 

 

07-Artic Chair Vestibules09-Vestibule10-Vestibule bottom

This is great! I started acquiring parts to build a Union Pacific 4800 series articulated diner several years ago. I have thought about how to make the jointed section, but haven't come up with anything workable. I think I will study yours and see if I can build upon what you have done for mine. Thanks for posting.

Michigan & Ohio Valley Lines posted:

My Polar Express Heavyweight observation car lighting and custom built rear...

That truly ia a wonderful, amazing looking mod, Keith. While I might be wrong, I seem to recollect that you'd done a pictorial thread showing step by step exactly how you did it but a forum search has been unable to locate any such post. If there was such a post, Keith, could you please post a link to that thread? Thanks.

Well  at least two things I have done with great success.  I have a S gauge 293 that is a A-one smoker.  I was successful in installing a on- off switch on the rear jack panel. That has worked very well for people that don't care for all the smoke.

The second item was a major uprade of my post war Jersey Central TM.  It didn't have any of the sound parts in it. So lots of room for improvements.  Installed a fuel tank with a speaker,  a ERR DC Commander,  an Alco sound set and converted all the lighting to LED's.  Pics below:DSC01569DSC01570DSC01571DSC01572DSC01574DSC01575

The last two shots are of my Williams scale GG1 with new lighting..

Marty

Attachments

Images (6)
  • DSC01569
  • DSC01570
  • DSC01571
  • DSC01572
  • DSC01574
  • DSC01575

I don't usually post in threads like this but this one got my attention...

Nice hefty list of what I did on these old Weaver U25Bs. Took me at least two months to get all this done.

Some work in progress shots...
U25B detail 1IMG_9868IMG_9903IMG_9889IMG_9953U25B detail 2

And after completion...

IMG_0064Good U25B 1U25B detail 4

I'll have to grab some higher resolution photos of the finished products when I get a chance.

And just for kicks, here's what they looked like out of box, except for the coupler and pilot.

Original U25Bs

Hope everyone enjoys. These guys haven't left the layout since the overhaul, after sitting on the shelf for a good 10 years or more beforehand.

Attachments

Images (11)
  • U25B detail 4
  • U25B detail 2
  • U25B detail 1: Note I re-re-decaled the number boards after this was taken with a more accurate font.
  • IMG_9868
  • IMG_9903
  • U25B detail 3
  • IMG_9889
  • IMG_9953
  • Original U25Bs
  • Good U25B 1
  • IMG_0064
Last edited by Steven Michael
Steven Michael posted:

I don't usually post in threads like this but this one got my attention...

Nice hefty list of what I did on these old Weaver U25Bs. Took me at least two months to get all this done.

Some work in progress shots...
U25B detail 1IMG_9868IMG_9903IMG_9889IMG_9953U25B detail 2

And after completion...

U25B detail 3U25B detail 4

I'll have to grab some higher resolution photos of the finished products when I get a chance.

And just for kicks, here's what they looked like out of box, except for the coupler and pilot.

Original U25Bs

Hope everyone enjoys. These guys haven't left the layout since the overhaul, after sitting on the shelf for a good 10 years or more beforehand.

What did you do for the marker lamps? Also any interior upgrades? Any Electrical Upgrades?

Mark, the marker lamps are painted on. I used a dark red to represent the lens itself (looking back this should have been a tan color to represent a clear lens), surrounded by a ring of silver. Takes a fine brush and a lot of patience. As for everything inside, all I did was reseat the bulb for the rear headlight which had fallen out of place. I didn't touch the electronics, they have stock EOB which is perfectly fine by me, it's reliable and it gets the job done.

These are all G scale (1/32) and I am glad I built them (or just modified the F40PH) . I'll be proud if I ever finish them. There's always so much to do to keep things running that I don't have the time to do what they deserve to get them correctly finished.

DSC_0591DSC_0592DSC_0593

The main reason I left G scale as my main focus, was all the equipment that was readily available in O scale. Most releases in G scale were in the older eras. I still also watch HO scale to see the amazing quantity of modern stuff that comes out. 

Attachments

Images (3)
  • DSC_0591
  • DSC_0592
  • DSC_0593

This is a Lionel Alaska RR GP7 from a set break up.  It was originally all blue with a black chassis.  I add all the yellow paint on the shell, a winterization hatch on a roof fan and swapped the chassis from a Maritime Exploration GP7 so now the chassis is yellow and it has rudimentary rail sounds.IMG_1900IMG_1901IMG_1902

Attachments

Images (3)
  • IMG_1900
  • IMG_1901
  • IMG_1902

I was bored and had a few spare K-line trucks, lego parts, and a Transformers figure who turns into a construction crane through "parts forming" (basically just take the guy apart and put him together in another form)

After some creative restructuring I found a way to put two 5mm ports commonly used for adding weapons and armor for Transformers figures on the bottom, attached two Lego technic pins to the ports, and then attached the K-line trucks to the ports. Now the Autobot "Ironworks" has gone from being an immobile crane to a slightly more mobile railroad crane.

Screenshot 2023-02-26 185057

Attachments

Images (1)
  • Screenshot 2023-02-26 185057

Whenever one of these threads turns up, I like to show off these MPC Delaware & Hudson Alcos that I "completed" the paint scheme on. The basics of the scheme was there, but just like their MPC Santa Fe counterparts, the nose color continued onto the pilot while the trucks and frames were left black. And of course, no headlight grille details and a single freight horn instead of a passenger-style chime horn. They came out rather nice with a bit of careful paintwork, including the PA-style "eyebrow" chrome strip.
P1030024

Attachments

Images (1)
  • P1030024

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×