Anyone found wheel stops that fit Fastrack? These are to catch the wheels before the coupler crashes into the bumper.
I use these on tubular track and they work really well (clips removed of course):
But they pop off of Fastrack sometimes all by themselves.
Thanks,
John
Replies sorted oldest to newest
If you want something permanent. I’ve been using ones from Scale City Design. They fit Gargraves well. Others I’ve tried seem to be more in line with 2 rail scale. I just use a little bit of JB Weld to hold them. They need just a little clean up with a file and then just need to be painted. I tried them on a piece of Fastrack. They fit nicely with just a little force needed to put them on. It’s possible you could get by without going.
3D Print with holes to screw down
@Dave_C posted:If you want something permanent. I’ve been using ones from Scale City Design. They fit Gargraves well. Others I’ve tried seem to be more in line with 2 rail scale. I just use a little bit of JB Weld to hold them. They need just a little clean up with a file and then just need to be painted. I tried them on a piece of Fastrack. They fit nicely with just a little force needed to put them on. It’s possible you could get by without going.
Those are nice Dave. I see they also have ones with tension screws as well. Know anything about those?
John
@AlanRail posted:
3D Print with holes to screw down
Impressive as always Alan.
Are you selling them?
John
selling? how many do you want?
Alan, those are cool. I'd be interested in maybe a dozen, depending on the price. Feel free to contact me privately.
or this
@AlanRail posted:selling? how many do you want?
A dozen as well, but I want to pay for them so please message me Alan.
John
or this
printing a test piece now;
sorry for the delay I tested positive last week. so I was a bit SLOWED!
Sorry to hear that Alan. I hope you and your family are well now and that your symptoms were relatively mild.
John
I would interested in a dozen.
That's it! That is the justification of buying a 3D Printer that I have been looking for!
Thanks!
Hope you are feeling OK Alan.
Our prayers are with you, Alan. Get well soon.
A 3- day bad cold and then nothing!
vaxed and boosted..... it works!
After a few more test prints I decided to allow all versions of trucks with various coupler lenghts and arrangements with
the thumbtack openers THAT I needed to split the wheel stops
Each is held in place with a recessed track screw.
Final design; email if interested... making pairs of 5.
Access to this requires an OGR Forum Supporting Membership
