Skip to main content

Replies sorted oldest to newest

Currently as is described in other threads, the MTH TIU connects to a Lionel LCS SER2 Module with an MTH supplied cable. The SER2 then is connected to the serial port on the Base2 with the LCS DB9 cable with power supply(6-81499). The Base3 appears to not have a serial port. The Base3 has 3 PDI connectors for LCS connection. Do the PDI ports on Base3 supply power for the SER2 and other LCS modules?

Mike

@Flyer 52 posted:

This is from the DCS Companion that Barry Broskowitz did which appears on the OGR forum in another thread. Note this drawing shows the Base2. The Base3 does not appear to have a serial port. This currently enables the DCS app to control Legacy locomotives, not sure beyond that.

The BASE3 supports the LCS SER2 module that supplies a serial port.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×