I have two Williams/Bachmann locomotives I cannot run them together because the reverse units are wired differently. One locomotive immediately starts in forward, one starts in neutral. Do I have to send off to Bachmann to replace one of the units so they can run togerther?
Tom,
This web page has Williams by Bachmann instructions for installing a lockout switch if you don't currently have one: http://www.williamstrains.com/...Instruct-Lockout.htm
Pay particular attention to the label on the tab up at the very top of your browser when this page opens up. The tab says "Instructions to start in Neutral", although this label is not actually listed on the web page itself.
Mike
Access to this requires an OGR Forum Supporting Membership
