Skip to main content

Hi to this awesome community

Anyone knows how to wire two Z-4000 together for a large lay out without going into "blocks"

I am doing fine with one transformer and get real good signal readings but when I run two lash ups and a passenger train I am getting very close to triping my braker.

I appreciate all your great help

jorge

Original Post

Replies sorted oldest to newest

JGE,

   Use the Blocks for best results, if you are running DCS.  If not power as much with LED's as you can, including bulbs in your switches and switch controllers.  

I run FasTrack with the low voltage switches, one Z4K can Power a fair sized layout, especially if you watch how many light passenger Cars you are running at one time.

PCRR/Dave

Last edited by Pine Creek Railroad

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×