Skip to main content

HI,

I am helping a friend build his layout using Fastrak.  Unfortunately he lives down in San Diego. 



He has two loops of fastrak that he wants independent from each other as he runs a lot of conventional engines.  He wants to use a crossover crossing one loop and the other using the other section.  The question is are the two  tracks on crossover electrically independent from each other???  Can the connections on bottom of Fastrak crossover be configured to make this possible???



Thanks  MikeD

Original Post

Replies sorted oldest to newest

I took a Dremel cutting wheel and cut off the strips connecting one track to the other on the bottom side of the crossover. I'm using 2 MTH Z1000 Transformers that are in phase with each other for my two separate tracks. I cut the mainline and kept the strip in place for backing into the yard as that train would obviously be going slower.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×