WIU not working

Ray,

the TIU and Wi-Fi lights on the WIU are not lit

Is the Power light on the WIU lit? If not, check to makes sure that the WIU is actually getting power.

If only the Power LED is lit, reset the WIU by giving it power and then using a paper cli[p to hold in the Reset button (in its hole) for a 10 count and then removing the paper clip.

This and a whole lot more about DCS WiFi is all in MTH’s “The DCS WiFi Companion 2nd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!

The power light is on.  I will try the reset.

Update:  power light is on and hold reset button down for a long 10 count - power light stays on but no change.  No other lights will illuminate except briefly and then off when unit first turned on.

 Thanks for the help.  

Ray,

power light stays on but no change.  No other lights will illuminate except briefly and then off when unit first turned on.

Those symptoms would seem to be indicative of an issue with the WIU itself. It doesn't appear to e going through it's power-up procedure.

About the only other thing that I can suggest is, with the power off, to toggle the MTH/Home switch back and forth a couple of times and then try again.

If that doesn't restore proper operation, I'd suggest a call to MTH tomorrow.

Thanks again Barry.  Will do.  MTH is just up the road in Columbia which is handy if I need to drop it off.

To close the loop for future reference if someone has a similar issue, the WIU had a dead radio board.  MTH service said this is not common and they fixed it quickly.