Skip to main content

I noticed some lights and a rotary beacon were not lit on my layout. I tracked the wiring to the 14 volt post on my Z4000 MTH transformer. When I checked the voltage with a volt meter the output was 0.0. The fixed 10 volt post and the variable posts are fine. Any ideas? Is there a separate circuit breaker for each post? Reach me at milt@paiger.org 

Thanks

Original Post

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×