Skip to main content

My Z1000 shorted out and was dead. So I replaced 3 things on the board based on feedback I got from this forum. I think you can tell which 3 things I replaced from the picture.  Now this thing behaves very oddly. When the throttle is at 0, there is no voltage on the outputs. As I turn up the throttle the voltage increases.  That part sounds great. When I put a legacy engine on the track with the throttle at 0 and plug the transformer in, the engine fires up, with 0 on my volt meter!  Also, when I turn up the throttle the bell starts ringing!  

My question is, can this be fixed or is it trash?  I would like to get this working if possible.

Attachments

Images (1)
  • 29DD05B1-A583-4270-888A-D0727A097B3F
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×