Skip to main content

5 replies

Engine House and Machine Shop

papa3railpapa3railOGR Forum Member

Now that the Lake and Bait Shack are in the rear-view mirror it's time for a new project.

The  Carl's Corner Engine House and Machine Shop

This will be made with the Atlas 2 stall kit with a scratch built Machine shop added on the back.

These will have completely detailed interiors.I'm thinking the shed will be circa 1900 with a stone foundation and the shop added on in the 1930s will have a concrete foundation.The piece of real-estate I have planned for this project has a bit of an awkward shape so it took a few hours on the drawing board to come up with this plan.The shop ends up being about a scale 1400 square feet.

 

Dave

Last edited by papa3rail
Original Post

Replies sorted oldest to newest

papa3railpapa3railOGR Forum Member

Thanks guys.

 

Checked out your site Peter excellent club layout.Kudos to all the gang over there.

 

 

Replaced the drawings above with a newer set.I had some clearance problems by the track and wasn't happy with the roof line.

 

I had to replace the WS roadbed with a solid 1/4 shim to get a nice smooth work surface.

I'll use 3/16 x 1/4 balsa strips to put a wood floor throughout this structure.

Had to bevel the underside of the floor boards between the rails to clear the nail plates on the ties.

Stained and glued in place.

Need to get the stone foundation for the Engine House in place before I do the rest of the floor.

Last edited by papa3rail

Add Reply

Views: 913
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×