Skip to main content

Reply to "Is there a way to CONDITIONALLY engage the stopping action of the Lionel 253 signal?"

bmoran4 posted:

Yeah, it looks like I will need a relay. @gunrunnerjohn, I only seem to be able to find DC relays, no low voltage AC ones. Any recommendations for a low voltage AC relay?

You can cobble-together (no soldering required) an AC relay for about $3.50 shipped as shown in this recent OGR thread:

insulated%2520rail%2520relay%2520for%25202-aspect%2520signal%2520using%2520cheap%2520ebay%2520modules

The first module converts fixed AC accessory voltage to 12V DC (requires a DC voltmeter to set the output voltage - see linked post).  The second module is a 12V DC relay module.  Note screw-terminals all around. 

The combo draws about 1/2 Watt of power when active.  In fact, you could dial down the output voltage of the AC-to-DC converter module to, say, 10V DC.  The 12V DC relay will still work fine but this would reduce power draw by ~30%.

 

Attachments

Images (1)
  • insulated%2520rail%2520relay%2520for%25202-aspect%2520signal%2520using%2520cheap%2520ebay%2520modules

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×