Skip to main content

Replies sorted oldest to newest

If you google "fremo freemo module legs" some ideas pop up.  I settled on this for my LCCA modules

IMG_6705

based on the below image I found on the internet.  I eventually eliminated the second wingnut and just put a lag bolt in that wasn't tightened all the way down.  The principal of this is to have the two pieces to the side of the leg be about 1/8" shorter than the thickness of the leg so it clamps it in place.  In use, you only have to loosen the one side a bit to remove/insert the leg.

unnamed

Brendan

Attachments

Images (2)
  • IMG_6705
  • unnamed

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×