Skip to main content

Just purchased first new train in 25 years.  Using MTH Z1000 transformer conventional. Placed train on track fired up after 10 seconds or so.  All the sounds work. Have on DCS, 3 rail.  No forward or reverse.  Just sits there.  Attempted factory reset with one horn followed by five bell.  Still nothing.  Vendor I purchased from has not answered email.  MTH not open on weekends.  Having second thoughts about moving forward in hobby

Original Post

Replies sorted oldest to newest

@hharvey posted:

Just purchased first new train in 25 years.  Using MTH Z1000 transformer conventional. Placed train on track fired up after 10 seconds or so.  All the sounds work. Have on DCS, 3 rail.  No forward or reverse.  Just sits there.  Attempted factory reset with one horn followed by five bell.  Still nothing.  Vendor I purchased from has not answered email.  MTH not open on weekends.  Having second thoughts about moving forward in hobby

Did the engine respond with the horn/bell?  People say the timing is tricky.  If this is your 1st in 25 years, that would probably occur.  Do you have a friend or LHS that you can visit?

Add Reply

Post
This forum is sponsored by MTH Electric Trains
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×