WILLIAMS E-60 PARTS

When I went looking for E-60 parts, I found none too.

I was forced to take parts from other non working engines,

thus 2 or 3 might make one.  Bachman needs to stock parts

and they tell me they do, but nothing I ever need.

Rod

I agree with you. you would think as they keep producing the same things over and over again they would at have a good supply of parts. as for buying shells for parts? I found a guy here with grabirons but the only way he would sell them is if I bought a shell with no pantos for 35.00.  to me 35.00 for 8 irons is way out of line almost 5 bucks a piece.   i'd use black 14 gauge romex first. wondering if I can get somebody to 3d print them cheaply?  as for the pantos if worse comes to worse I could always use a mth faively panto thanks for the reply  joe

Try either Frank Vacek (410)465-3782 or Charlie; His shop is - Model Trains Outlet Harrisburg ,PA 717-564-8633 Email- kc97trainsmto@aol.com

jackson

Thanks Jackson, I'll ad them to my list.

Sorry to intrude, but I appreciate all the help I can get.

Not intruding at all. Have been roaming the internet and this is all that i was able to find:

let me know if you find it i'd give it a try  thanks joe

after looking at both the atlas and the e-60 it would be a tough fit to make them work so I gotta pass and hope for the best lets see what York brings.  thanks anyway  joe

Joe,

Fair enough - i just sent you a private email before i read this one. Assume neither of the Williams parts sources i mentioned earlier were able to help. Good luck at York.

jackson