Skip to main content

I am trying to get my city section moving along after doing some trackwork the past few days. This is a modified Harry Heike cantilevered factory front. I wanted to build it as a cantilevered building but found that I had to do too many mods to the existing trackwork to make it work. I shaved down some of the concrete details and built up some of my own using basswood and spackle.

 

 

IMG_1880

IMG_1893

The next task is to decide its final location. I will arrange and rearrange these buildings until I bite off all my fingernails.

 

IMG_1887

Attachments

Images (3)
  • IMG_1880
  • IMG_1893
  • IMG_1887
Original Post

Replies sorted oldest to newest

Hi Northville, from a fellow Detroit Tigers Fan

   I noticed your Detroit, Tigers Cap in your photo.

Went to your blogspot, you have a first class blog page, a lot of photos showing the progress of your layout. This was very helpful to understand the objectives for your layout.

Cheers from The Detroit & Mackinac Model Railway

 

Hey thx guys, appreciate the kind words.

 

Dave, I must have at least 20hrs. or so into it. I started it, then modified it into the 2" flat that it is now, then worked on other things for a bit before coming back to it last weekend. Once I get its final location nailed down (not sure if I will use the Terminal Warehouse yet), I will add some minor roof details.

Slugger thanks but I didn't snag any construction shots on this one. I should get back in the habit though now that I am getting used to the new shop I set up.

Dave, I would think. I'd imagine there'd be a nice collection of planks and such in the shipping and receiving department to assist with loading and unloading. I think it will be a nice place to pose a few boxcars.

The TMB former location had a RR siding on the other side of the building we occupied. Trains rolled right up to doors bu did need a metal ramp to fill the gap of about 4 feet
SteveOriginally Posted by SIRT:

Yes Dave, many buildings had roll-up’s.  Steel diamond plates were used to cover the gap between the freight car & platform – loading dock.

 

 

 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×