Skip to main content

3 replies

HO / MTH DSC Remote Controller and TIU

NicholasLEbyNicholasLEbyOGR Forum Member

Hey All,

 

Recently made the switch to HO gauge, didn't have space for O gauge in my tiny apartment. Leftover from my O gauge set-up I have:

 

1. TIU with DCS Remote Controller

2. MTH Z750 Transformer with barrel jack adapter

 

What can I do to get HO running? I've search this forum and there are some answers but seems to be some discrepancy between running ac/dc at the same time? I know I need to get a DC transformer. So my questions would be:

 

1. what DC transformer do I need (voltage)?

2. what channel to connect the DC transformer to?

3. do I need to power the TIU as well with AC?

4. do I need to change any TIU settings now that i'm going to run HO?

 

Thanks so much everyone, I have all HO PS3 engines. Appreciate any help!

 

 

 

 

 

 

 

 

 

 

 

Original Post

Replies sorted oldest to newest

G GGGOGR Forum Member

Get a DC transformer rated at 18-20VDC with enough Amps for your layout.  3 to 5Amps should do.

 

Nothing special, I would just power FIX1 with the  Transformer and FIX1 out to the layout.  You can also use FIX 2 for a second loop.

 

Fixed 1 must be powered to power the TIU.

 

If you wanted you could get a smaller DC power pack for the AUX channel, but probably not needed for small layout.  G

Add Reply

Views: 191
Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×