Just purchased from that auction site a Lionel Trackmobile and found that one of the windows popped out.
Can someone advise me which screws should I remove to get to the windows without messing with the electronics?
I also assume I should use model canopy glue in order to prevent the windows from fogging up.
Thanks in advance.
George
Replies sorted oldest to newest
Sorry, couldn't resist! First thing I did to mine is pick it up by the cab and promptly popped out one of the windows! 
I don't remember the exact sequence of taking it apart, but I can tell you it's a bit of a PITA. Getting the wires hidden that go up to the top of the cab is a fun experience after you take the cab off.
Apparently, the windows in these are not all that secure, so you should never pick it up by the cab.
Thanks John for the "heads up" on the hidden wires.
Least I know I'm not the only klutz here 
George
Apparently, the windows in these are not all that secure, so you should never pick it up by the cab.
There was a thread way back when these came out about this. I couldn't find it. Sorry. the only solution as I recall is "don't do that!"
FWIW, I do use canopy glue to secure them when I get to them. I haven't lost another one, and I'm in no hurry to repeat my experience with the Trackmobile.
Access to this requires an OGR Forum Supporting Membership
