What am I missing -Sensor track

If the sensor track isn't connected, it's doubtful that it will do much.  It has trouble operating out of the shipping box.

 

I know, but wanted to know what I was missing.  It will be installed in a few minutes, really don't know why it took me so long to do this after all I spent $2.00 on this engine,

Thanks, Gunrunner

 

Brent

The announcements and the like are when you have LCS installed in an iPad.  If you have just the sensor track wired up, when the locomotive runs over it, it'll fill in all the information like road name, engine type, etc.

 

The big thing the sensor track can do is trigger a recorded sequence when a specific locomotive with a sensor, or any locomotive with a sensor runs across it.

 

You do not need anything else other than the sensor track, a Legacy or Cab1l base, and an LCS power supply to get the pre recorded announcements. When your engine passes over depending on the selected pre recorded action you will get a bell, whistle, etc. no iPad needed.  As GRJ said it will also fill in the orange module info to the Cab 2 rather than using the module.

Add a WiFi module and the sensor track using the LSU app will locate your engine on the layout you created on the app.

 

And this custom user-recording feature, also, does NOT require an iPad.

Right on Rudy, I should have made that clear.