Will 14 gauge speaker wire be to ok to use on a 10'x10' layout?
My power source is a mth z750
output is 21v ac 3.75a
I will not be using a bus wire setup.
the layout will be built on four tables
I will be isolating the main line into four sections with a siding that will be isolated from the main.
All and any help would be appreciated.
Replies sorted oldest to newest
I like 14 gauge the best for good power supply and signal. Speaker wire works fine for me. Outdoor lighting cable works too. The OGR wire is probably the best I have got my hands on.
Please ask any questions you need help with here.
i should also mention i am using atlas three rail track. if that makes and difference.
14 gauge is perfect, as that is the route I went. However since you are using Atlas as I did also use Atlas track power connectors and attach them to the 14 gauge under the table. No soldiering no fuss. You will be very happy with the results in power to track, easy of installing and most of all in looks above the table top.
Engineer-Joe posted:The OGR wire is probably the best I have got my hands on.
I will second this opinion for OGR wire. Great for DCS systems. Very good wire and that is what I used on my layout for all track power. #14 should be more than enough for your 10'x10' layout.
I also use Atlas 3 rail track and switches. It is very nice track, IMO (my favorite). Quiet, seldom needs cleaning and it works very well here.
Access to this requires an OGR Forum Supporting Membership
