Cab1 wire diagram

@Fivenehocs posted:

My Cab1 stopped working. Upon opening it up I found the red wire soldered to the R16 post on the circuit board had come off at the other end. Can anyone tell me where the wire should be attached to?

David

https://www.tuveson.com/TMCCSc...s/TMCCSchematics.htm would be my first place, but I didn't see the CAB1 remote.

That said, pictures are always a good second place

My thought is- the red wire could be either the tiny piezo speaker used for the beep indicator, or the big red button jack- that may not be used so not preventing it from working. But then there is also the red to the battery tray +.

better head on picture from the same topic

https://ogrforum.ogaugerr.com/...25#78016146396833125

So looks like the second picture was a better view, and the thinner red wire is the speaker, the thicker red wire is the battery +, and only the yellow wire- maybe a black to the jack for the external button function?

Thanks for the replies, never thought it would go there.