Skip to main content

I picked up used DCS System model J. It was factory reset. nothing on it.    I have windows 10 laptop with no DCS downloads installed but do have all the required connector wires to upgrade.   I'm hoping to make it WiFi  What do I need to download to install version #5.   Instructions on website seem confusing..  thanks   Joe

Last edited by JC642
Original Post

Replies sorted oldest to newest

Here is the link to the download page: http://www.protosound2.com/

protosound

In the DCS Software Updates table, download "DCS Version 5.00" and "DCS Consumer Loader Program". The Consumer Loader will do the upgrade of the system and provides step-by-step instructions along the way. The DCS Version 5.00 file has the upgrade code.

Barry's book goes into great detail. He has an ebook available that you can download. Here is the link: http://ogaugerr.com/the-dcs-companion-3rd-edition/

George

Attachments

Images (1)
  • protosound

In the DCS Software Updates table, download "DCS Version 5.00" and "DCS Consumer Loader Program". The Consumer Loader will do the upgrade of the system and provides step-by-step instructions along the way. The DCS Version 5.00 file has the upgrade code.

Barry's book goes into great detail. He has an ebook available that you can download. Here is the link: http://ogaugerr.com/the-dcs-companion-3rd-edition/

George

Thanks, I have the first edition and read through it.  I upgraded my original TIU to 3.1 with my old XP computer and I can recall it required initial downloads prior to downloading newer upgrades.. My concern now is the DCS remote was factory reset, nothing on it and this laptop has none of the older loader programs installed.  I don't know if just the two downloads on a new laptop will get me where I need to go?

Joe  

Last edited by JC642

This should be all you need. Give it a try. You can't hurt anything by trying the upgrade. I have done several upgrades and am now at 5.0. It only seems to get easier. So, if you have done a 3.1 upgrade, you should be fine with 5.0. If you have any trouble, come back to the forum, and I am sure you will get an answer.

George

Last edited by George S
George S posted:

This should be all you need. Give it a try. You can't hurt anything by trying the upgrade. I have done several upgrades and am now at 5.0. It only seems to get easier. So, if you have done a 3.1 upgrade, you should be fine with 5.0. If you have any trouble, come back to the forum, and I am sure you will get an answer.

George

Thanks George.  Upgrade went perfect..   It sounded intimidating and confusing but it was far easier then I first imagined.   You just need to follow ALL the instructions carefully.   Now its on to the WiFi....

Joe

JC642 posted:
George S posted:

This should be all you need. Give it a try. You can't hurt anything by trying the upgrade. I have done several upgrades and am now at 5.0. It only seems to get easier. So, if you have done a 3.1 upgrade, you should be fine with 5.0. If you have any trouble, come back to the forum, and I am sure you will get an answer.

George

Thanks George.  Upgrade went perfect..   It sounded intimidating and confusing but it was far easier then I first imagined.   You just need to follow ALL the instructions carefully.   Now its on to the WiFi....

Joe

Great news! Congrats!

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×